Select your vehicle

Smittybilt XRC Gen2 Front Bumper with Winch Plate – Light Texture Finish (Black) – 76807LT

Smittybilt

Shop Smittybilt Front Bumpers on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Slickrock 4X4 is a participant in the Amazon Associates Program. As an Amazon Associate we earn from qualifying purchases.

  • Smittybilt XRC Gen2 stubby front bumper with winch plate, part 76807LT
  • 3/16-inch cold rolled steel with light texture black powder coat
  • Solid D-ring and jack point mounts, O.E. fog light provision
  • Light tabs hold up to two 9-inch lights; D-rings and lights sold separately

Description

Overview

The Smittybilt XRC Gen2 front bumper with winch plate, part number 76807LT, is a stubby front bumper made from 3/16-inch cold rolled steel with a three-stage light texture black powder coat. It is built for a high approach angle, with raised corners for ground clearance.

The new Gen2 solid D-ring and jack point mounts are welded on the inside and out, though the D-rings themselves are sold separately. The front stinger is 1.75-inch tubing and has light tabs that hold up to two 9-inch lights, also sold separately. A lower winch plate allows more airflow, and the bumper includes cutouts for the original equipment fog lights.

Key features

  • XRC Gen2 stubby design in 3/16-inch cold rolled steel, robotically welded
  • Raised corners for better entry and exit angles
  • Gen2 solid D-ring and jack point mounts welded inside and out
  • 1.75-inch over rider and kickers with .120 wall
  • Lower winch plate allows greater airflow
  • O.E. fog light provision and cutouts
  • Light tabs that hold up to two 9-inch lights
  • Three-stage light texture black powder coat
  • 5-year limited warranty, and a Smittybilt Advantage lifetime warranty

Lights, winches and wiring

A stubby bumper with a winch plate changes how the front of the truck is loaded. The raised corners and stubby profile help with approach angle, but the added weight of a winch and lights shifts the load to the bumper mounts. Check the frame mounting points before adding heavy accessories.

Light tabs make it easy to add driving lights, yet every light needs its own power path. Run wiring through a fused relay and route it along the frame, away from the radiator and moving suspension parts. Use weatherproof connectors where the wiring enters the bumper.

Winch selection starts with the vehicle’s front end and the bumper rating. A winch that exceeds the rated limit can damage the plate or the mounts, so match the winch to the plate rating and the vehicle’s weight. Use a rated synthetic or steel line, check the hook and clevis, and inspect the mounts after each recovery.

  • Use a fused relay for added lights
  • Inspect winch mounts after each recovery

Specifications

Brand Smittybilt
Part number 76807LT
UPC 631410137194
Product XRC Gen2 front bumper with winch plate
Material Cold rolled steel, 3/16 in
Finish Three-stage light texture black powder coat
Over rider and kickers 1.75 in tubing, .120 wall
Winch capacity Up to 12k (features) or 10,000 lb (description)
Light tabs Hold up to two 9 in lights
Width Stubby
D-rings Mounts included, D-rings sold separately
Warranty 5-year limited; Smittybilt Advantage lifetime warranty

Vehicle fitment

Confirm fit for your vehicle’s year, make and model before ordering.

Confirm the exact winch rating before choosing a heavy winch, since the 12k and 10,000 lb figures differ. Confirm your vehicle’s year, model and trim before ordering.

Installation notes

The bumper has a winch plate and fog light cutouts. Lights added to the tabs should be wired through a fused relay.

What’s included

  • Front bumper with winch plate
  • Solid D-ring and jack point mounts
  • Fog light cutouts

Not included: D-rings and lights, which are sold separately, and the winch.

SKU: S/B76807LT Category:

Specification

Shipping weight 133.00 lbs
Package dimensions 53.00 × 26.00 × 13.00 in
brands

Questions & Answers

What is the Smittybilt 76807LT?

76807LT is the XRC Gen2 front stubby bumper with winch plate, made from 3/16-inch cold rolled steel with a light texture black powder coat. It has fog light cutouts.

Does the 76807LT include D-rings?

No. The solid D-ring mounts are welded in, but the D-rings are sold separately. Lights for the tabs are also sold separately.

How big a winch will the 76807LT take?

Confirm the exact winch limit before choosing a winch, because the two rated figures for this bumper differ. Check that your winch's weight and rating fit the plate.

Does the Smittybilt 76807LT have a warranty?

Yes. The powder coat finish carries a 5-year limited warranty, and Smittybilt also lists its Advantage lifetime warranty. Confirm terms with Smittybilt.

Can I use a fog light cutout for other lights?

The cutouts are for the original fog lights, and any other light needs its own mounting. Choose lights that fit the tabs or mounting points, and wire them through a fused relay. Confirm the light's size and mounting before drilling anything.

Find it on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Shop Smittybilt Front Bumpers on Amazon