Overview
The Smittybilt M1 612830 is a front winch bumper for Ford Super Duty trucks, in black powder coat with D-ring mounts and a driving and fog light kit. Smittybilt builds the M1 from 3/16″ cold rolled steel with 1/4″ mounting plates.
The winch mount system holds a winch up to 16,500 lb, and the bumper bolts on completely with no drilling. The solid plate center section wraps the frame horns and the lower crossmember, and the 7/8 inch D-rings are welded on the inside and outside. The powder coat is a two stage finish.
Key features
- Winch mount system rated for a winch up to 16,500 lb
- 7/8 inch solid D-ring mounts welded inside and out
- Ultra Bright driving lights and fog lights
- Solid plate center section that wraps the frame horns and lower crossmember
- 3/16″ cold rolled steel with 1/4″ mounting plates
- Bolts on completely; no drilling
Choosing a winch bumper
A winch bumper changes the front of a truck in ways that matter off the road. The bumper adds weight, moves the center of gravity forward and can change approach angle, so it is worth checking how the front suspension and steering will handle the extra load. Mounting into the frame horns, as this design does, spreads winch loads across the frame instead of the bumper alone.
Before buying, check the winch you plan to use against the bumper’s rating, and confirm the winch’s mounting plate, cable and fairlead fit. Winch cable should be inspected for fraying, and the roller or hawse should line up with the fairlead. Because the winch and fairlead are sold separately, choose them together and confirm they match the mount.
- Confirm winch weight and rating match the bumper
- Check front bumper clearance for the radiator and lights
- Inspect cable and fairlead before every recovery
- Recheck bolts after the first trail runs
Specifications
| Brand | Smittybilt |
|---|---|
| Part number | 612830 |
| UPC | 631410102673 |
| Series | M1 truck front bumper |
| Material | Cold rolled steel, 3/16″ with 1/4″ mounting plates |
| Finish | Black two stage powder coat |
| Maximum winch | 16,500 lb |
| D-ring mounts | 7/8 inch, solid |
| Lights | Ultra Bright driving and fog lights |
| Vehicle | Ford Super Duty, years not stated |
Vehicle fitment
The M1 is built for Ford Super Duty trucks. Confirm the model years and trim for your truck before ordering.
Super Duty trucks span several generations, so verify the year, model and trim of your truck before buying.
What’s included
- M1 front bumper
- Winch mount system
- 7/8 inch solid D-ring mounts
- Ultra Bright driving lights and fog lights
Not included: a winch and fairlead.




















