Overview
The Smittybilt Stainless Steel Door Window Channel Kit, part number S/B7497, is a stainless steel kit for factory soft tops with half doors on the 1987–1995 Jeep Wrangler (YJ). It covers the full YJ range from 1987 to 1995.
The kit converts early 1987 YJ soft top steel half doors to the late-model 1988–95 fastener style. It includes left and right door channels and screws. Some drilling is required, and the kit is used with the Supertop 51600.
Key features
- Stainless steel construction
- Left and right door channels included
- Screws included
- Converts early 1987 soft top half doors to the 1988–95 fastener style
- Sold as a pair
Preparing for the conversion
Window channels guide the side glass or soft top edge on a Jeep’s half doors, so the fastener change affects how the top seals and how the doors close. Before starting, look at the existing soft top and door frames for cracked brackets, bent steel and worn fasteners. Replacing these parts first avoids working around damage later.
Drilling is the step that takes the most care. Measure twice, mark each hole with the new channels in place, and start with smaller pilot holes where possible. Remove burrs and clean metal shavings from inside the door frame so they do not work into the hinge area or scratch the paint.
Stainless steel resists rust well, but it can gall against steel fasteners if they are not matched. Use the screws in the kit rather than mixing in older hardware. Tighten fasteners evenly and check the fit of each door before the top goes back on.
Specifications
| Brand | Smittybilt |
|---|---|
| Part number | S/B7497 |
| Material | Stainless steel |
| Included | Left and right door channels and screws |
| Quantity | Sold as a pair |
| Use | Factory soft top with half doors |
| Compatible with | Smittybilt Supertop 51600 |
| Drilling | Some drilling required |
| Fit | Direct fit |
Vehicle fitment
It fits the 1987–1995 Jeep Wrangler (YJ). Confirm fit for your vehicle’s year, model and trim before ordering.
The list does not include the Wrangler TJ, LJ, JK or JL, or the Cherokee. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Some drilling is required. The kit is used with the Supertop 51600.
What’s included
Left and right stainless steel door channels and screws.
Not included: the Supertop 51600 soft top and the half doors the kit is meant to work with.










