Overview
The Smittybilt 2 Inch Drop Ball Mount (part 2902) is a Class III hitch ball mount with a 2 inch drop for 2 in x 2 in receivers. It is the shallower of Smittybilt’s drop mounts, suited to trailers that sit close to receiver height. Smittybilt rates it for up to 6,000 lbs gross trailer weight and 600 lbs tongue weight.
The drop is formed from Q235 steel that has been forge hardened, then robotically welded for consistent joints. Reinforcing gussets add strength at the drop, and the black powder coat resists rust on the exposed steel.
Key features
- 2 inch drop for trailers that ride close to receiver height
- Class III rating: up to 6,000 lbs GTW and 600 lbs tongue weight
- Reinforced gussets at the drop
- Robotic welds for accuracy and strength
- Black powder coat for corrosion protection
- Fits 2 in x 2 in receivers
Choosing a drop mount
A drop mount sets the ball lower than the receiver so the trailer tongue sits level when hitched. Before buying one, measure the height from the receiver to the ground with the vehicle loaded the way you normally tow, then measure the trailer coupler height. The gap between those two figures shows whether a shallow drop like this one suits the trailer.
Drop mounts put extra leverage on the receiver and hitch pin, so inspect the welds, gussets and pin hole for cracks before each trip. Check that the ball nut is tight after the first few miles of towing, since vibration can loosen it. Keep the trailer load balanced so the tongue weight stays within the rating for your vehicle.
Specifications
| Brand | Smittybilt |
|---|---|
| Part number | 2902 |
| UPC | 631410109665 |
| Drop | 2 inch |
| Receiver (shank) size | 2 in x 2 in |
| Ball hole size | 1 inch |
| Material | Q235 steel, forge hardened |
| Finish | Black powder coat |
| Towing rating | Class III: up to 6,000 lbs GTW, 600 lbs tongue weight |
Vehicle fitment
It fits 2 in x 2 in receivers and is not built for a specific model year. Confirm that your receiver is 2 inches square and check the towing ratings for your vehicle and trailer before hitching up.
Installation notes
Compare the drop with your current hitch height. A 2 inch drop is the smaller step of the pair, and the height change is easiest to judge with the trailer loaded and level.
What’s included
The drop ball mount only. Check the package contents against your installation before starting, including the hitch ball and any pins or clips your setup requires.









