Overview
The Smittybilt M1 612802 is a front winch bumper for Ram trucks, with built-in D-ring mounts and a driving and fog light kit, finished in black powder coat. Smittybilt makes the M1 from 3/16″ cold rolled steel with 1/4″ mounting plates.
The winch mount system holds a winch up to 16,500 lb. The bumper bolts on without drilling. A solid plate center section wraps the frame horns and the lower crossmember, giving the winch and recovery points a frame-tied base.
Key features
- Winch mount system for a winch up to 16,500 lb
- 7/8 inch solid D-ring mounts, welded on the inside and outside
- Ultra Bright driving lights and fog lights included
- Solid plate center section wraps the frame horns and lower crossmember
- 3/16″ cold rolled steel with 1/4″ mounting plates
- Signature series two stage black powder coat
- Bolts on without drilling
Winch and bumper setup
A front winch bumper changes the weight over the front axle and the way the truck handles on the road. Plan for the winch weight and keep it mounted square and centered. Winch lines load the mount in a direction the bumper must handle, so the mounting plate and frame connection should be checked after each heavy recovery.
Choose a winch that matches the mount rating and the vehicle’s weight. A fairlead guides the line onto the drum and reduces wear at the mount. Use rated recovery gear, such as shackles and straps, and keep hands and body clear of the line during pulls. Check the electrical wiring for the lights and winch circuit before the first trail run.
- Confirm the winch weight fits the mount rating
- Check the frame bolts after heavy recovery use
- Keep the winch wiring fused and routed away from heat
Specifications
| Brand | Smittybilt |
|---|---|
| Part number | 612802 |
| UPC | 631410102666 |
| Series | M1 truck front bumper |
| Material | Cold rolled steel, 3/16″ with 1/4″ mounting plates |
| Finish | Black two stage powder coat |
| Maximum winch | 16,500 lb |
| D-ring mounts | 7/8 inch, solid |
| Lights | Ultra Bright driving and fog lights |
| Winch mount | Included |
| Installation | Bolt-on, no drilling |
Vehicle fitment
The M1 bumper is built for Ram trucks, and model years are not covered here, so match the bumper to your truck’s year and generation before ordering.
Ram trucks changed between generations, so match your truck’s year and generation before ordering. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The bumper bolts on completely with no drilling. A winch must be supplied separately and should not exceed the 16,500 lb rating of the mount.
What’s included
- Front bumper with winch mount system
- 7/8 inch solid D-ring mounts
- Ultra Bright driving lights and fog lights
Not included: a winch and fairlead.






















