Overview
The Smittybilt JH45K is a hitch kit with a 2-inch receiver for the Jeep Wrangler (JK), which the manufacturer offers as a factory style towing solution for owners who want to start towing with a JK. The receiver is gloss black powder coated for a smooth finish.
The kit includes an OE style wire adaptor that plugs into the OEM wire harness, so there is no splicing and no guessing which wire goes where. The connectors are OEM quality with a watertight seal.
The ratings depend on body style. Two-door models are rated for 2500 lb gross trailer weight and 250 lb tongue weight. Four-door models are rated for 3500 lb gross trailer weight and 350 lb tongue weight. The receiver is a 2 inch by 2 inch rear receiver in Class II.
Key features
- Gloss black powder coat finish
- 2 inch by 2 inch rear receiver
- Class II rating
- Designed to OEM specifications
- Plug and play wire adaptor
- No cutting, splicing or taping required
- Watertight OEM quality connectors
Wiring and trailer lights
A plug in harness adapter keeps the vehicle wiring intact, which makes removal simpler if you change tow setups later. Before towing, confirm the trailer lights, turn signals and brake lights all respond. Check the connector seating after rough trails, and make sure the harness is secured away from the exhaust and moving suspension parts.
Towing also depends on the trailer’s own electric brakes or surge brakes, which need their own controller or setup. Tongue weight should sit in the range the receiver rating allows. Use a locking pin and a secure safety chain arrangement every time you connect.
- Test all trailer lights before each trip
- Secure the harness away from heat and moving parts
- Use a locking pin and safety chains
Specifications
| Brand | Smittybilt |
|---|---|
| Part number | JH45K |
| UPC | 70000679039 |
| Finish | Gloss black powder coat |
| Receiver | 2 inches by 2 inches, rear |
| Weight class | Class II |
| Two-door rating | 2500 lb gross trailer weight, 250 lb tongue weight |
| Four-door rating | 3500 lb gross trailer weight, 350 lb tongue weight |
| Wiring | Plug and play OE style adaptor |
Vehicle fitment
It is for towing with a Jeep Wrangler (JK), the generation built from 2007 to 2018.
The JL and the earlier TJ and LJ Wranglers are not covered by this fitment. Confirm your vehicle’s year, model and trim before ordering.
What’s included
The receiver hitch and the OE style wire adaptor.






































