Overview
The Smittybilt 2 inch wheel to wheel nerf steps with cleated steps, part number T1678CC, are gloss black side steps for the 2016-2023 Toyota Tacoma.
Smittybilt says its nerf steps are suited to lifted truck applications, with a 2 inch main tube and cleated step plates. The steps are a one-piece unit that bolts to the vehicle frame without pre-assembling brackets, and they run wheel to wheel to protect the rocker panels.
Key features
- Wheel-to-wheel length with cleated step plates
- 2 inch main tube construction
- Gloss black finish
- Rated by Smittybilt to handle weights of up to 445 pounds
- One-piece unit that bolts to the frame without pre-assembling brackets
- Drop-down step design, offered in a 4 or 6 step version. Confirm the version for your truck before ordering.
- Protects the rocker panels
Side step use on lifted trucks
Side steps give a boost for getting into a lifted truck and help keep the rocker panels out of the way of mud, rocks and brush. A wheel to wheel run covers more of the sill than a short step, which is useful on a truck with a higher ride height. The steps add some weight at the sides, so they are best judged against the rest of the truck’s load and the steps’ rated capacity.
Mounting points on the frame carry the step load, so check the bolts and the frame contact area after the first trail runs and at regular service. Keep the steps clear of the tire path and the bottom edges of the doors. Clean the step plates and check for loose cleats, which can catch footwear or cause slips.
- Re-check hardware after the first trail runs
- Keep the step plates clear of mud and debris
Specifications
| Brand | Smittybilt |
|---|---|
| Part number | T1678CC |
| Product type | Nerf steps (side steps) |
| Main tube | 2 inch |
| Step plates | Cleated |
| Length | Wheel to wheel |
| Finish | Gloss black |
| Weight capacity | Up to 445 pounds |
| Mounting | Bolts to the vehicle frame |
| Fitment type | Direct fit |
Check the step length and mounting clearance against your build before installing.
Vehicle fitment
The manufacturer fitment list for the Smittybilt T1678CC nerf steps covers:
- 2016–2023 Toyota Tacoma (Limited, SR, SR5, TRD Off-Road, TRD Pro, TRD Sport, Trail)
Match your year, model, trim, engine and drivetrain to part number T1678CC before ordering.
It fits the 2016-2023 Tacoma only. Earlier Tacoma generations and other Toyota models are not covered. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
- Torque every fastener to the specified value and follow the installation steps in order.
- Check clearance around doors, tailgates, tires and moving parts before driving.
- Re-check all hardware after the first miles of driving.
- Read all instructions before starting, and support the vehicle on jack stands rated for its weight rather than on a jack alone.
- Wear eye protection and gloves, and replace any worn, damaged or corroded fasteners.
What’s included
One-piece unit that bolts onto the frame without pre-assembling brackets. Check the hardware against the installation before starting.









