Overview
The Skyjacker D200S is a Softride front leaf spring for lift heights of 1.5 to 2.5 inches. It is a single spring, and bushings are not included.
Skyjacker recommends bushing part number SKYSE21D. The D200S is built from progressive multileaf packs in American steel, and Skyjacker describes its load capacity as at or above OE.
Key features
- Progressive multileaf pack construction
- American steel
- Front position
- Load capacity rated at or above OE.
- Recommended bushing SKYSE21D
Settling on the right lift
Lift height is the first thing to confirm with a front leaf spring. Measure the current front height from the ground to a fixed point on the fender or frame, then decide how much change the new spring should make. Measure both sides, because uneven sag can make a spring look like a height problem when it is really a worn component.
Front springs work with the bump stops, shocks and steering geometry. A taller spring may need longer brake lines or a steering check, and the shocks should match the new ride height. Ask a shop to look over the front end after installation, especially the tie rods and track bar.
- Measure both front fender heights before buying
- Plan for bushings as a separate purchase
- Check shock length against the new height
Specifications
| Brand | Skyjacker |
|---|---|
| Part number | D200S |
| UPC | 803696122199 |
| Position | Front |
| Spring quantity | Single spring |
| Bushings | Not included; recommended bushing SKYSE21D |
| Lift height range (summary) | 1.5 to 2.5 in |
| Lift height range (fitment table) | 0 to 4.99 in |
| Material | American steel |
| Warranty | Limited lifetime |
Vehicle fitment
The D200S names no vehicle. Its fitment entry reads Direct Fit with a 0 to 4.99 inch range, which conflicts with the 1.5 to 2.5 inch summary, so settle the lift figure first.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Bushings are not included, and Skyjacker recommends part SKYSE21D, which is a separate part.
What’s included
One single front leaf spring.
Not included: Bushings. Skyjacker recommends SKYSE21D.







