Overview
The Skyjacker M95932 is an M95 Performance monotube shock absorber measuring 26.65 in. extended and 15.87 in. collapsed. It is a direct fit for the 2014–2018 Ram 2500 in Big Horn, Laramie, Laramie Limited, Laramie Longhorn, Limited, Lone Star, Outdoorsman, Power Wagon, SLT and Tradesman models.
The monotube body uses a high-pressure nitrogen gas charge and a floating piston. The single-tube design helps the shock run cooler under extreme conditions.
Key features
- Extended length of 26.65 in.
- Collapsed length of 15.87 in.
- Monotube design with nitrogen gas charge
- Floating piston technology
- Direct fit for the 2014–2018 Ram 2500
Heavy-duty shock considerations
Full-size pickups like the Ram 2500 carry heavier loads, and shocks on these trucks work hard when towing or hauling. Monotube shocks with a floating piston are often chosen for steady damping when the truck is loaded. Choose a shock that suits how the truck is used, whether daily driving, towing, or work trips.
Length matters on heavy trucks. The extended and collapsed lengths set the range a shock can cover, so compare these with the old shock before installation. Check the upper and lower mounts for wear, and inspect bump stops for cracks, since these take the load at the end of travel.
- Compare extended length with the old shock
- Check upper and lower mount bushings
- Inspect bump stops for cracks
- Recheck torque on mounts after the first drives
Specifications
| Brand | Skyjacker |
|---|---|
| Part number | SKYM95932 |
| Shock series | M95 Performance |
| Shock type | Monotube |
| Charge | Nitrogen gas |
| Extended length | 26.65 in. |
| Collapsed length | 15.87 in. |
| Fitment type | Direct fit |
Vehicle fitment
It fits the 2014–2018 Ram 2500 in Big Horn, Laramie, Laramie Limited, Laramie Longhorn, Limited, Lone Star, Outdoorsman, Power Wagon, SLT and Tradesman models. Ram 1500 and 3500 trucks, and 2013 and 2019 Ram 2500 years, are not covered.
The list covers only the Ram 2500 in 2014–2018, so the Ram 3500 and 1500 are not included, and neither are 2013 or 2019 Ram 2500 years. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Check the 26.65 in. extended and 15.87 in. collapsed lengths against the shock being replaced before ordering, then have the alignment checked after installation.
What’s included
Confirm whether this shock is for the front or rear position before installation. Check the boot and mounting hardware against your setup.









