Overview
The Skyjacker M9578 is an M95 Performance rear monotube shock with a 46mm bore. It is a nitrogen gas monotube with an internal bump stop and 180 degree directional mounting. It is designed for the w/10 – 9.5 in. lift range and suits 1973-1991 Chevrolet and GMC trucks and SUVs.
Skyjacker calls its M95 monotube shock the ultimate shock absorber for light trucks, Jeeps and SUVs. The single tube design helps operating temperatures stay cooler under extreme conditions, and the high pressure nitrogen gas and floating piston technology combine to create what Skyjacker describes as the fastest responding shock ever.
The shock is sold as each, so one shock comes in the package.
Key features
- M95 Performance monotube design
- Nitrogen gas charged
- Large 46mm bore
- Internal bump stop
- 180 degree directional mounting
- Rear position
- Listed lift height w/10 – 9.5 in. lift
- Sold as each
Signs of a worn damper
A rear damper that has lost control lets the body bounce and sway, and the vehicle can feel loose on rough roads or when braking. Monotube dampers rely on sealed gas pressure, so a shock that has lost that pressure may feel soft and slow to respond. The gas and oil system should not leak, and any sign of seepage means the unit has failed.
Look at the body of each shock for oil, check the mounting bushings for cracks, and inspect the bump stops where they are visible. Uneven tire wear, a nose that dives heavily on braking and a rear end that keeps moving after bumps are common signs of wear. Replace worn shocks in matched pairs and recheck the fasteners after the first drive.
Specifications
| Brand | Skyjacker |
|---|---|
| Part number | M9578. The alternate number is SKYM9578. |
| UPC | 803696211602 |
| Product type | Monotube shock absorber |
| Shock series | M95 Performance |
| Gas | Nitrogen gas charged |
| Bore | 46mm |
| Bump stop | Internal |
| Mounting | 180 degree directional mounting |
| Position | Rear |
| Lift height | w/10 – 9.5 in. lift |
| Sold as | Each |
| Fitment type | Direct fit |
Vehicle fitment
The stored manufacturer fitment list for the Skyjacker M9578 covers Chevrolet and GMC trucks and SUVs from 1973 to 1991 in the trims listed in the manufacturer data. Chevrolet models include the Blazer, K10, K20, K20 Suburban, K30, V10, V20, V30 and the V1500 and V2500 Suburbans. GMC models include the Jimmy, K15, K25, K35, K1500, K2500, K3500, V1500, V2500 and V3500 and their Suburban versions, plus the 1986 C2500 Suburban.
Only the years and models in the manufacturer list are covered. Later Chevrolet and GMC trucks, and model years outside each listed range, are not included. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Suspension, steering and axle parts are safety-critical, so professional installation is the sound choice. Follow the installation instructions and torque every fastener to specification.
- Support the vehicle on rated jack stands on level ground; never work under a vehicle held only by a jack.
- Inspect nearby bushings, mounts and hardware while the area is open, and replace anything worn.
- Re-check fastener torque after the first miles of driving, and again at regular service intervals.
- Have the alignment checked after any suspension or steering work.
- Confirm tire, brake line and wiring clearance through the full range of suspension travel before driving normally.
What’s included
One M95 Performance monotube shock absorber, sold as each.
Not included: Shocks for other positions and mounting hardware are not included.









