Overview
The Skyjacker Softride Leaf Spring FR904S is a single rear leaf spring that gives 6 in of lift, made for the 2009–2017 Ford F-150.
The Softride leaf springs are made from American steel, and each leaf is shot-peened with hardened steel pellets. The shot peening compresses the steel surface and increases tensile strength. The process is intended to support wheel travel and ride quality while preserving spring life. The spring includes rubber bushings and is sold individually.
The FR904S is a rear leaf spring, so it is an axle-end part rather than a complete lift kit. The Softride design uses shot peening to compress the surface of the steel, which increases tensile strength.
The FR904S is a single spring per unit, with rubber bushings included, a rear position, and a lift height range of 5 to 6.99 inches. The catalog number is SKYFR904S and the UPC is 803696198118. A pair of springs for both sides of the vehicle requires two units.
Key features
- Softride leaf spring, rear position
- Lift height 6 in (range 5 to 6.99)
- Made with American steel
- Each leaf shot-peened with hardened steel pellets
- Rubber bushings included
- Sold individually (single spring)
- Direct fit
Signs the springs are worn
Leaf springs lose height gradually as the leaves fatigue and the bushings wear. A sagging rear end, uneven ride height side to side, or a truck that bottoms out on bumps can all point to a spring that is near the end of its service life. Look at the spring eyes and bushings for cracking or movement, and check whether any leaves have shifted out of alignment.
Rear springs also work with the axle, shocks and U-bolts. When one spring is replaced, check the other side for matching height and wear, and inspect the shocks because they can fail alongside the springs. A replacement leaf spring should be checked for proper axle alignment after installation.
- Check for sagging or uneven rear height
- Inspect spring eyes and bushings for wear
- Look at shocks and U-bolts when replacing a spring
Specifications
| Brand | Skyjacker |
|---|---|
| Part number | FR904S |
| Catalog number | SKYFR904S |
| UPC | 803696198118 |
| Part type | Softride leaf spring |
| Position | Rear |
| Lift height | 6 in |
| Lift height range | 5 to 6.99 in |
| Bushings | Rubber bushings included |
| Quantity | Single spring, sold each |
| Fit type | Direct fit |
Vehicle fitment
The manufacturer fitment list for the Skyjacker FR904S covers the 2009–2017 Ford F-150 in the FX4, King Ranch, Lariat, Lariat Limited, Limited, Platinum, SSV, STX, XL and XLT trims.
The list does not include F-150 model years before 2009 or after 2017. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
A leaf spring swap changes ride height and axle position, so professional installation is the safer route. Torque the hardware to specification, retighten after some driving, and have the alignment checked. A lifted truck may also need new brake line length checks.
What’s included
One rear leaf spring with rubber bushings.
Not included: Check the package contents against your installation before starting, including shocks and any U-bolts you need.






