Overview
The Fox Racing Shox 980-26-966 is a 2.0 Factory Series smooth body reservoir shock with a CD adjuster, sold as a direct replacement shock. Fox describes its direct replacement line as a bolt-on swap for many applications, from stock to lifted vehicles.
The body is aluminum, and the shock is hydraulic and gas charged. The CD adjuster controls compression damping, which sets how firmly the shock resists being compressed. Confirm fit for your vehicle before buying, since this shock is sold as a direct replacement.
Key features
- Aluminum smooth body
- Reservoir shock design
- CD (compression damping) adjuster
- Hydraulic, gas-charged construction
- Direct replacement, bolt-on design
Choosing a replacement damper
Replacing a shock is mostly about matching the setup you already have. Length and stroke affect how much the suspension can travel and how the shock sits at ride height, so a shock that is too long or short can bind or limit articulation. Lifted and stock vehicles often need different lengths, so measure the current unit before deciding.
Adjustable dampers pair well with new springs or bump stops, because changes in ride height alter how the shock works. After a swap, check that the shock has room at full compression and full droop. Inspect the bushings and mounting ends at the same time, since worn ends can throw off alignment and wear the new unit early.
- Check shaft and eye clearance at full droop
- Inspect bushings when you replace the shock
- Note the CD setting before changing it
Specifications
| Brand | Fox Racing Shox |
|---|---|
| Part number | 980-26-966 |
| UPC | 70000695016 |
| Series | 2.0 Factory Series |
| Body | Aluminum, smooth body |
| Adjuster | CD |
| Construction | Hydraulic / gas charged |
| Extended length | 22.81 inch |
| Collapsed length | 14.87 inch |
| Stroke | 7.94 inch |
Vehicle fitment
This shock is a bolt-on direct replacement design. Match it to your truck or Jeep’s year, model and trim before ordering, and compare the 22.81 inch extended and 14.87 inch collapsed lengths with the shock you are removing.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Compare the 22.81 inch extended and 14.87 inch collapsed lengths with the shock you are replacing before ordering.
What’s included
Confirm the contents, including mounting hardware, before fitting the shock.








