Overview
The Skyjacker M95 Performance Monotube Shock Absorber M9514 is a front gas-charged monotube shock for a 2 to 4 in lift range. It fits 1966–1979 Ford F-250 models in several trims and the 1979 Ford F-350 in Custom, Ranger, Ranger Lariat and Ranger XLT trims.
The shock uses a single tube with high pressure nitrogen gas and a floating piston. The design keeps operating temperatures cooler under extreme conditions. The 46mm bore, internal bump stop and 180 degree directional mounting are part of the same design.
Key features
- Single tube gas monotube design
- High pressure nitrogen gas with floating piston
- Large 46mm bore
- Internal bump stop
- 180 degree directional mounting
- Includes shock boot
Gas monotube basics
A monotube shock keeps the oil and the gas in one tube, separated by a floating piston. That layout helps the shock hold damping steady over long runs, because the gas pressure keeps the oil from foaming. On a front axle, the shock controls steering wobble and body roll, so a worn unit can make the truck feel loose on the highway or wander over ruts.
When you replace a front shock, compare the mount style and eye size with the old unit before buying. Front shocks work with the steering linkage, so check the tie rod and track bar for play at the same time. Inspect the boot as well, since a torn boot lets grit into the shaft and wears the seal. Replacing shocks in pairs keeps both sides damping the same way.
- Look for oil leaks at the shaft seal
- Check the mounting bushings for cracks
- Inspect the boot for tears or dirt
- Test steering play after installation
Specifications
| Brand | Skyjacker |
|---|---|
| Shock series | M95 Performance, M95 Series |
| Part number | M9514 |
| UPC | 803696211381 |
| Position | Front |
| Lift range | 2 to 4 in |
| Damping | Gas charged |
| Construction | Nitro gas monotube |
| Bore | 46mm |
| Bump stop | Internal |
| Mounting | 180 degree directional |
| Boot | Included |
Vehicle fitment
It fits 1966–1979 Ford F-250 models in Base, Custom, Northland, Ranger, Ranger Lariat, Ranger XLT and XLT trims, and 1979 Ford F-350 models in Custom, Ranger, Ranger Lariat and Ranger XLT trims. Confirm your vehicle’s year, model and trim before ordering.
The list does not include Ford F-150 trucks or F-250 and F-350 models after 1979. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Confirm that your suspension lift sits within the 2 to 4 in range. The shock is directional at 180 degrees, so check its orientation before installation, and support the front end on jack stands while working.
What’s included
One front shock absorber with a shock boot.









