Overview
The Skyjacker Heavy Duty Add-A-Leaf Rear, part R222, is a pair of black long-type rear add-a-leaf packs with tie bolts, for a 2 inch lift. It fits 1994 to 2001 Dodge Ram 1500 trucks in the Base, LT, Laramie, ST and Sport trims.
An add-a-leaf pack adds a leaf to the rear leaf spring stack, raising the rear end. Skyjacker backs the packs with a limited lifetime warranty.
Key features
- Heavy duty add-a-leaf design
- Listed lift height of 2 inch
- Tie bolts included
- Long type, black finish
- Comes as a pair
Rear suspension and load
Rear add-a-leaf packs add a leaf to the rear spring stack, which raises the back end and can help support a heavier load. The new leaf changes how the spring flexes, so the ride will feel firmer when the truck is unloaded and the rear will sit higher. Packs of this type are usually fitted in pairs so both sides carry the same load.
Inspect the rear springs, shackles and bushings when the packs are in. Look for sag, cracked leaves, and clearance between the tires and fenders at full suspension travel. Rear brake lines and driveline angles change with lift, so check them after the first few drives and recheck the tie bolts.
- Check tire clearance at full travel
- Inspect shackles and spring bushings
- Recheck tie bolts after the first drives
Specifications
| Brand | Skyjacker |
|---|---|
| Part number | R222 |
| UPC | 803696155104 |
| Position | Rear |
| Lift height | 2 inch |
| Type | Long |
| Included | Tie bolts |
| Quantity | Pair |
| Finish | Black |
Vehicle fitment
Fits these Dodge Ram models: 1994-2001 Dodge Ram 1500 (Base, LT, Laramie, ST, Sport).
Ram 2500 and 3500 models are not in this list; see the R370 pack for those. Ram 1500 years outside 1994 to 2001 are not covered. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Support the rear axle and frame on jack stands while the springs are swapped. The tie bolts are included with the pair.
What’s included
A pair of rear add-a-leaf packs with tie bolts. Check the package contents against your installation before starting.









