Overview
The Skyjacker Heavy Duty Add-A-Leaf Rear, part R370, is a pair of black long-type rear add-a-leaf packs with tie bolts, for a 3 inch lift. It fits 1994 to 2001 Dodge Ram 1500, 2500 and 3500 trucks, in the trims shown below.
Add-a-leaf packs add a leaf to the rear spring stack, which raises the rear end. Coverage for these packs is listed by the brand as limited lifetime.
Key features
- Heavy duty design for rear add-a-leaf use
- Listed lift height of 3 inch
- Tie bolts included
- Long type, black finish
- Covers Ram 1500, 2500 and 3500 in the listed years
Driveline after a 3 inch lift
A rear lift changes the angle of the driveshaft, which affects vibration, u-joint wear and the feel of acceleration. Heavier lifts tend to create more angle, so the driveline should be checked after the packs are fitted. Look for vibration at highway speed, clicking from the u-joints, or grease leaking from the joint seals.
Rear packs also raise the axle relative to the frame, so brake lines, parking brake cables and the exhaust should be checked for clearance and stretch. Support the axle and keep it centered during the swap, and recheck the tie bolts after the first few drives. Regular inspection of the spring pack is worthwhile on trucks that carry heavy loads.
- Check driveline angle after the lift
- Inspect u-joints for play or leaking grease
- Check brake lines and exhaust for stretch
Specifications
| Brand | Skyjacker |
|---|---|
| Part number | R370 |
| UPC | 803696155234 |
| Position | Rear |
| Lift height | 3 inch |
| Type | Long |
| Included | Tie bolts |
| Quantity | Pair |
| Finish | Black |
Vehicle fitment
Fits these Dodge Ram models:
- 1994-2001 Dodge Ram 1500 (Base, LT, Laramie, ST, Sport)
- 1994-2001 Dodge Ram 2500 (Base)
- 1994-2001 Dodge Ram 3500 (Base)
Ram models from 2002 onward and Ram 1500 models before 1994 are not in this list. Other makes are not covered. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
A 3 inch lift changes ride height, so have the alignment and driveline angles checked after installation. Support the rear axle on jack stands during the swap.
What’s included
A pair of rear add-a-leaf packs with tie bolts. Check the package contents against your installation before starting.








