Overview
The Skyjacker GMDL4 is an offset, adjustable steering drag link for lifted applications, designed for a 4 to 6 inch lift height. It fits the factory tie rod end.
The link is designed to allow maximum articulation, and the tie rod tube is built for steering loads on lifted trucks.
Key features
- Offset and adjustable design
- Fits the factory tie rod end
- Allows maximum articulation
- Lift height range of 4 to 6 inches
- Direct fit design
Steering geometry after a lift
A drag link connects the steering box or gear to the tie rod ends, passing steering input across the front axle. When a truck is lifted, the link angles change, and that shifts how the steering moves through its travel. An adjustable link lets the length be set so the steering stays centered and the joints work within their range.
Once the link is adjusted, check toe and centering on a level surface, then road test at low speed. Inspect the joints and boots at each service, since dust and water wear them quickly on trail use. Any change to tie rod ends, track bar height or tire size can alter the setting, so review the steering after those changes.
- Check steering centering after adjustment
- Inspect joints and boots at each service
- Review the setting after tire or lift changes
Specifications
| Brand | Skyjacker |
|---|---|
| Part number | GMDL4 |
| UPC | 803696134192 |
| Type | Drag link |
| Lift height | 4 to 6 inches |
| Design | Offset and adjustable |
| Tie rod end | Fits factory tie rod end |
| Warranty | Limited Lifetime Warranty |
Vehicle fitment
Confirm fit for your steering setup and vehicle year, model and trim before ordering. Check the factory tie rod end and your current steering components before installing.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
An adjustable drag link changes steering geometry, so toe and steering alignment should be checked after installation. Use a shop with alignment equipment for the final setup, and work with the vehicle safely supported.
What’s included
One drag link. Check the package contents against your installation before starting, including any hardware needed for the install.








