Overview
The Moog drag link DS80749 is a steering linkage part sold individually. A drag link connects the pitman arm to the steering knuckle on the driver’s side, so it carries steering force and any looseness in it shows up as wander. It fits 2005 to 2007 Ford F-250 and F-350 Super Duty trucks, and trim lines are not used for fit.
The Problem Solver design features a powdered metal gusher bearing that delivers grease to the stud, a patented cover plate that supports tighter tolerances, and a full ball metal stud with 360 degrees of rotation. Patent pending Sunoloy coated bearings give smooth stud swing.
Key features
- Gusher bearing design that delivers grease to the stud
- Patented cover plate, which MOOG says allows tighter tolerances
- Full ball metal stud with 360 degrees of rotation
- Patent pending Sunoloy coated bearings
- Sold individually
Drag link wear on heavy trucks
The drag link transfers steering force from the pitman arm across to the knuckle, so it takes repeated load on every turn and over rough ground. The ball joints inside it usually wear first, and a worn joint lets the front wheels drift off line. Heavy-duty trucks often run more load through this link than lighter vehicles, so checking it after trail or towing use is a sensible habit.
Drag link replacement is often done alongside the tie rod ends and pitman arm when play has built up across the linkage. Keep the boots intact on any ball joint, and expect the front alignment to need adjustment after the link is changed, since the toe setting moves with it.
- Check ball joints for play by hand
- Look for grease leaking from boots
- Inspect the pitman arm connection
- Recheck steering centering after the work
Specifications
| Brand | Moog |
|---|---|
| Part number | DS80749 |
| UPC | 80066389264 |
| Product type | Drag link |
| Sold as | Individually |
Vehicle fitment
It fits the 2005 to 2007 Ford F-250 Super Duty and the 2005 to 2007 Ford F-350 Super Duty. Match your truck by model and year to one of those two entries. Other Super Duty years and models are not covered. Confirm the year and model before ordering.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
A drag link replacement changes the steering geometry at the toe setting, so the front end should be aligned afterward. Check the new link’s ball joints for play once installed.
What’s included
One drag link, sold individually.
Not included: Cotter pins, nuts and other hardware are not included. Check the fasteners against your installation before starting.







