Overview
The Skyjacker TJ60R is a set of two rear Softride coil springs for a 6-inch lift on the Jeep Wrangler TJ and the Jeep Wrangler LJ Unlimited. It fits the 1997–2006 Wrangler TJ and the 2004–2006 Wrangler LJ Unlimited.
Skyjacker says these rear springs are preset and formed from 5160H chromium alloy. They are designed to be used with a coilover shock absorber mount and one of the lift kit suspension components named under installation notes.
Key features
- Rear coil spring set of 2
- 5160H chromium alloy, preset and formed
- Formed from 5160H alloy, which is designed for higher tensile strength.
- Powder coated to resist corrosion
- Individual coils available separately
- Limited lifetime warranty stated by Skyjacker
Rear springs with lift components
Rear coil springs carry the rear axle’s weight and set body height, so a lift changes how the axle sits under load. On a Wrangler, a coilover shock setup depends on the spring seat, shock mount and lift components working together, so plan these parts as one system rather than swapping them piece by piece.
Check the shock mount, brake lines and driveline angles after installing rear springs. Lifted rear axles can change pinion angle, so inspect u-joints for vibration and confirm rear alignment. Replace worn bushings and shock eyelets before they fail under load, and keep coilover mount hardware tightened to the recommended torque.
- Inspect shock mounts and spring seats
- Check driveline angles after the lift
- Replace worn bushings with the springs
Specifications
| Brand | Skyjacker |
|---|---|
| Part number | TJ60R |
| UPC | 803696163765 |
| Position | Rear |
| Lift height | 6 inch |
| Material | 5160H chromium alloy |
| Finish | Powder coated |
| Quantity | Set of 2 |
| Fitment type | Direct fit |
| Warranty | Limited lifetime |
Vehicle fitment
Skyjacker’s manufacturer fitment list covers two Jeep groups for these rear springs:
- 2004–2006 Jeep Wrangler (LJ), Unlimited
- 1997–2006 Jeep Wrangler (TJ), 65th Anniversary Edition, Rubicon, SE, Sahara, Sport and X
Wrangler JK and other Jeep generations are not on this list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The TJ60R needs a coilover shock absorber mount (PN SKTJB1) and one of these lift kit suspension components: PN TJ40RR-DX, TJ60, TJ603-SVX or TJ68-DX. After a lift, a wheel alignment and a check of driveline angles are usually worth doing.
What’s included
A set of two rear coil springs.
Not included: the coilover shock absorber mount (PN SKTJB1) and the lift kit suspension component, which the product requires.





