Overview
The Rugged Ridge X-Clamp in Silver, part number 11030.11, is a universal tube-mount clamp for holding lights, cameras, antennas and similar accessories on round tubing. It belongs to the patent pending X-Clamp Mounting System and fits tubing regardless of which vehicle it is attached to.
Owners who mount accessories to roll bars, bumpers or other round steel frames can use the silver version when a bright, matching finish is preferred. The clamp is offered in silver, black and textured black, and its tube range and mounting details are summarized below.
Key features
- Pivotal Fit Technology: rotate the clamp to match the tube diameter, then pivot the mounting bracket to the desired angle.
- Designed for tubing in the 2.25-3 inch diameter range.
- Mounts lights, cameras, antennas and other accessories, with the accessory added after the clamp is set.
- Silver finish, one of three finishes in the X-Clamp range that also includes black and textured black.
- Patent numbers 9,610,888, 9,145,084 and D773,110 are attached to the design, which is patent pending.
Keeping accessories steady
Mounting a light or camera to round tubing works best when the clamp and the bracket grip together. Start by seating the clamp on the tube, then set the angle before fully tightening. Doing it in that order keeps the accessory aimed where you want it.
Vibration is the main enemy of tube mounts. Rough tracks shake the bracket loose over time, so inspect the fasteners, the clamp jaws and the bracket pivot after each outing. Replace any worn or bent hardware rather than relying on extra tightening.
Silver finishes show scratches sooner than textured surfaces. Wipe grit off the tubing contact area and avoid harsh abrasives so the finish stays clean across seasons.
- Check bracket pivot for play
- Look for scratches where the jaws grip
Specifications
| Brand | Rugged Ridge |
|---|---|
| Part number | 11030.11 |
| UPC | 804314256678 |
| Finish | Silver |
| Tube diameter, 2.25-3 inch range | 2.25-3 inch |
| Size (manufacturer field) | 2- 2.5 Inches bars |
| Fitment (manufacturer field) | Universal Fit |
| Patent numbers | 9,610,888; 9,145,084; D773,110 |
Vehicle fitment
It is a Universal Fit clamp, so it is not tied to a particular year, make, model or trim. Compatibility depends on the round tubing you mount to.
Measure your tube before choosing this clamp, since the size field and the stated range give different tube ranges. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Rotate the clamp to fit the tube diameter, pivot the mounting bracket to the desired angle, and then add the accessory. Measure the tube first, because the two size ranges below do not match.
What’s included
The clamp is the mounting piece; lights, cameras and antennas are added separately.
Not included: lights, cameras, antennas or other accessories, which are added separately.









