Overview
The KC HiLites Light Mount Tube Clamp, part number 73091, is a universal tube clamp that attaches auxiliary lights to round metal such as bumpers, grille guards, light bars and roof racks. It creates extra light tabs on an off-road vehicle. Designs are available for .75 in to 3 in diameters, and the clamps work with most popular light bar diameters.
The clamp body is glass filled nylon composite, which is impact resistant and waterproof. The material avoids the rust-prone steel used in many mounts. Each clamp comes with rubber shims for fine-tuning the fit of the light and offers a range of adjustability for different lighting needs.
Key features
- Designs for .75 in to 3 in diameter tubing
- Attaches to almost any piece of tubular metal, from bumpers to roof racks
- Glass filled nylon composite that is impact resistant and waterproof
- Rubber shims for a fine tune fit of lights
- Adjustability range for different lighting needs
- Creates extra light tabs for additional auxiliary lights
Mounting lights on tubing
Clamp-style light mounts work by gripping the tube and holding the light’s bracket in place. The tightening force needs to be even on both sides of the tube. Uneven pressure can let the light rotate after a few rough miles, so snug each fastener in small steps and check that the clamp sits square to the tube before moving on. Vibration from trail use is the main thing working against a loose mount.
Aim the light only after the clamp is fully tightened, because the aim can shift as the clamp settles. Glass filled nylon holds up well where moisture and road grime build up, but it still benefits from periodic inspection. Look for hairline cracks around the clamp jaws and for any gap that opens between the tube and the shims.
Specifications
| Brand | KC HiLites |
|---|---|
| Part number | 73091 |
| UPC | 84709730918 |
| Material | Glass filled nylon composite |
| Diameter range | .75 in to 3 in |
| Included | Rubber shims |
| Fitment | Universal Fit |
Vehicle fitment
It is a universal fit, so it is not tied to a particular make, model or year. Suitability depends on the tube diameter and where you mount the light, so measure the tubing before choosing a design. Confirm fit for your vehicle’s year, model and trim before ordering.
This clamp is not limited to specific vehicles. If your mounting point is unusual, measure the tube diameter and confirm it falls within the .75 in to 3 in range before buying.
Installation notes
Use the rubber shims to fine-tune fit and aim of each light. The clamp is designed for tubular metal.
What’s included
Tube clamp mounts with rubber shims.
Not included: Lights. None are listed with this clamp.












