Select your vehicle
-13%

Rugged Ridge Spartan Front Bumper with Standard Ends and Tube Override – 11548.02

Rugged Ridge

Shop Jeep Wrangler JK Front Bumpers on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Slickrock 4X4 is a participant in the Amazon Associates Program. As an Amazon Associate we earn from qualifying purchases.

  • Spartan front bumper with standard ends and tube overrider for the 2007-2018 Jeep Wrangler JK
  • High-strength plate steel, textured black powder coat
  • Stand-alone winch plate and D-shackle mounts; D-rings not included
  • Direct bolt-on with all hardware, 5-year limited warranty

Description

Overview

The Rugged Ridge Spartan 11548.02 is a front bumper with standard ends and a tube overrider for the 2007-2018 Jeep Wrangler JK, in 2 and 4 door models. Rugged Ridge built the Spartan Series for owners who want a classic off-road bumper look without extra weight.

The one-piece design uses standard bumper ends for full-width protection. It is built from high-strength plate steel with fold and weld construction and finished in textured black powder coat. A stand-alone winch plate forms the backbone, and D-shackle mounts and a tubular overrider are included, though D-rings are not.

Rugged Ridge engineered the Spartan Series for the Jeep enthusiast who wants the look of a classic off-road bumper without the extra weight. The fold and weld construction is meant to give greater structural integrity, precise fit and a high-quality appearance.

The rugged textured black powder coat resists rust and corrosion. Rugged Ridge also mentions pending patents on the design and backs the bumper with a 5-year limited warranty.

The standard ends give full-width protection, and the one-piece design keeps the bumper a single unit rather than a bolted-together assembly.

Key features

  • Standard bumper ends with tubular overrider
  • High-strength plate steel with fold and weld construction
  • Textured black powder coat
  • Stand-alone winch plate
  • D-shackle mounts included
  • Direct bolt-on installation
  • All necessary installation hardware included
  • Works with the factory JK fog lights
  • 5-year limited warranty

Overrider and fog light planning

A tube overrider changes how the front of a Jeep handles brush, rocks and tree limbs. It keeps the bumper’s face clear of the body during contact and gives a place for recovery to hit without stressing the ends. Consider how often you run dense trails before choosing a bumper with an overrider, because the tube changes the front profile.

Factory fog lights often sit close to the bumper face, so check that the lamps and their wiring still clear the bumper ends after installation. Keep the wiring routed away from moving suspension parts. A bumper with standard ends can be paired with a winch plate, but plan the winch cable path before mounting the winch to avoid rubbing the plate.

Recovery points need the same attention. D-shackle mounts take the load from straps and shackles, so use shackles rated for the pull and inspect the mounts after heavy use. Keep mud and grit out of the threads and bolt holes so the hardware can be removed for service later.

  • Route fog light wiring away from the winch area
  • Use shackles rated for the load you expect
  • Clean mounting threads before each install

Specifications

Brand Rugged Ridge
Part number 11548.02
UPC 804314297886
Product type Front bumper with standard ends and tube overrider
Position Front
Finish Textured black powder coat
Material High-strength plate steel
Width Full
Winch mount Included
Light mounts Included
D-ring mount Included, D-rings not included
Warranty 5-year limited
Fit type Direct fit

Vehicle fitment

It is a direct bolt-on replacement for the 2007-2018 Jeep Wrangler JK in 2 and 4 door models. All the necessary installation hardware is included.

The JL and earlier Wrangler generations are not in the list. Confirm your vehicle’s year, model and trim before ordering.

Installation notes

The bumper bolts directly on and the installation hardware is included.

What’s included

Front bumper with standard ends, stand-alone winch plate, D-shackle mounts, tubular overrider and installation hardware.

Not included: D-rings are not included.

SKU: RUG11548.02 Category:

Specification

Shipping weight 78.00 lbs
Package dimensions 74.00 × 14.00 × 10.00 in
brands

Fitment

VehicleYearsTrims
Jeep Wrangler (JK)2007–201870th Anniversary, 75th Anniversary, Rubicon, Sahara, Sport, Sport S, Unlimited 70th Anniversary, Unlimited 75th Anniversary, Unlimited Rubicon, Unlimited Sahara, Unlimited Sport, Unlimited Sport S, Unlimited X, X

Use “Select your vehicle” at the top of the page to check this part against your vehicle.

Questions & Answers

Does the Rugged Ridge 11548.02 fit a Wrangler JK?

Yes. It is a direct bolt-on replacement for the 2007-2018 Wrangler JK, and all the necessary installation hardware is included.

Are D-rings included with the Spartan 11548.02?

No. The bumper includes D-shackle mounts and a tubular overrider, but the D-rings themselves are not included, so a pair of shackles has to be bought separately.

Can I keep my factory fog lights with the 11548.02?

Yes. The Spartan bumper uses the factory JK fog lights for a finished look, which means no extra lighting expense is needed for the fog lamp positions.

How should the D-shackle mounts be checked?

Inspect the D-shackle mounting plates for cracks, bent edges and loose bolts after heavy recovery use. Make sure any shackles are rated for the load before attaching them, and keep the mounting points clear of mud so they seat properly.

Find it on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Shop Jeep Wrangler JK Front Bumpers on Amazon