Overview
The Rugged Ridge Spartacus 11544.64 is the most complete Spartacus bumper kit for the 2007-2018 Jeep Wrangler JK, with a front bumper and over-rider bar, winch plate, Spartan grille, rear bumper, HD tire carrier and a set of D-rings.
The bumpers are made of 11-gauge steel by a stamping process, and both change between wide and narrow configurations. That allows room for larger wheels and tires or improved angles. The Spartan grille has an aggressive look.
The soft contours of the stamped steel bumpers give the kit a modern look. The stamping process creates a high strength 11-gauge steel bumper that weighs less than many aftermarket bumpers.
Of the Spartacus kits, this one has the most parts: besides the front bumper and over-rider bar, winch plate, rear bumper and D-rings, it adds an HD tire carrier and the Spartan grille, which Rugged Ridge describes as aggressively styled and extremely versatile.
Both bumpers use an adaptable design that changes between wide and narrow configurations. That gives Wrangler owners two different appearances to accommodate larger wheels and tires, as well as improved approach and departure angles.
Rugged Ridge lists US design patents D760,133, D775,013 and D776,582 for the Spartacus bumpers. Compared with the 11544.62 kit, this one adds the Spartan grille and the tire carrier.
Key features
- Front bumper with over-rider bar
- Winch plate included
- Spartan grille included
- Rear bumper with HD tire carrier
- D-ring shackles included
- 11-gauge steel
- Wide or narrow configurations
Tire carrier and grille fit
A full kit with a grille and tire carrier changes the front and rear of the Jeep at once, so the parts should be fitted with the bumpers in mind. The grille sits in front of the radiator area, and its mounting needs to clear the front bumper and winch plate. Check clearance at the grille and the bumper before final tightening.
The HD tire carrier mounts to the rear bumper and carries the spare tire, which adds weight to the rear end. Heavier loads put more stress on the carrier mounts, so inspect them after rough trail use. Keep the spare tire properly secured and check the carrier bolts regularly.
Wide or narrow configuration changes affect how the tire carrier and grille sit relative to the body. Measure clearance on both ends after any change, and recheck the fasteners after the first few trail runs.
- Check grille clearance against the winch plate.
- Inspect tire carrier mounts after rough trail use.
- Recheck all fasteners after the first few trail runs.
Specifications
| Brand | Rugged Ridge |
|---|---|
| Part number | 11544.64 |
| UPC | 804314285258 |
| Product type | Front and rear bumper kit with grille and tire carrier |
| Finish | Powder coat |
| Material | Steel, 11-gauge |
| Width | Full; convertible to wide or narrow |
| Winch mount | Included |
| D-ring mount | Included |
| Light mounts | Not included |
| Fit type | Direct fit |
Vehicle fitment
The 11544.64 fits 2007-2018 Jeep Wrangler JK models.
The 11544.62 kit is the same bumper set without the grille and tire carrier. Confirm your vehicle’s year, model and trim before ordering.
What’s included
Front bumper with over-rider bar, winch plate, Spartan grille, rear bumper, HD tire carrier and D-rings.
Not included: The winch and lights.














