Overview
The Rugged Ridge Performance 8500 winch, part number 15100.02, is rated for 8,500 lbs (3,852 kgs) single-line pull. It uses a 5.5hp 12V series wound motor, a 3-stage planetary gear train with a 172.8:1 ratio and an automatic in-drum brake. It is set up with synthetic rope and a hawse fairlead, and it is a universal fit winch.
Rugged Ridge says each unit has been independently tested to meet or exceed its specifications. Its solenoid mounting brackets let the solenoid tilt for ease of use, which the company says suits almost all off-road bumpers and over-riders.
Key features
- 8,500 lb rated single-line pull
- Stainless steel hardware on exterior body screws and bolts
- Solenoid mounting brackets with multiple mounting points and a tilting solenoid
- Automatic in-drum brake
- Remote control included with 12 ft lead
- Synthetic rope type
Choosing a winch for your rig
A winch of this rating is usually paired with a bumper or mount built to carry it. Check the mounting plate and bumper before choosing a location, because the solenoid bracket and bolt pattern decide where the winch can sit. Plan the cable path so the rope runs out straight to the anchor point.
Synthetic rope is lighter and easier to handle than wire rope, but it needs care. Keep it free of abrasion and kinks, and avoid letting it drag over sharp rock. Wire rope handles heat differently, so pick the cable type that suits how you usually recover.
The automatic in-drum brake holds the load without manual adjustment. Still, check the brake and drum after heavy use and keep the winch clean and dry between trips.
- Confirm the mounting plate can take the load
- Keep the remote lead away from moving parts
- Use the hawse fairlead to guide the rope
Specifications
| Brand | Rugged Ridge |
|---|---|
| Part number | 15100.02 |
| UPC | 804314219154 |
| Rated line pull | 8,500 lbs (3,852 kgs) single-line |
| Motor | 5.5hp 12V series wound |
| Control | Remote switch, 12 ft (3.7 m) lead |
| Gear train | 3-stage planetary |
| Gear ratio | 172.8:1 |
| Fairlead | Hawse |
| Weight | 80.5 lbs (36.5 kgs) |
| Bolt pattern | 10.0 in x 4.50 in |
| Brake | Automatic in-drum |
| Overall dimensions (L x W x H) | 22 in x 6.3 in x 8.1 in |
| Drum size | Diameter 2.52 in |
| Cable type | Synthetic rope |
| Warranty | Limited 2 year against manufacturing defects (1 year on electrical) |
Vehicle fitment
No specific vehicle is named for this winch. It is a universal fit design, so year, make and model fitment is not confirmed.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Check the 10.0 in x 4.50 in bolt pattern against your mounting plate before bolting the winch down. The brake is automatic and sits in the drum, with no separate brake adjustment needed.
What’s included
The remote control is included, with its 12 ft lead. Check the package contents when it arrives against the parts you need for installation.









