Overview
The Warn XD9000 winch, part number 28500, is a 9000 lb self-recovery winch with a 12V DC series wound motor and a single-line rated line pull of 9000 lbs (4080 kgs). It offers quick no-load line speeds and a 3-stage planetary geartrain.
The XD9000 has a compact shape and a separate control pack, which makes mounting more flexible, including in tight spaces. It is a universal fit winch and is not built for one make, model or year. Check mounting room and battery capacity for your own vehicle before buying.
Key features
- Quick no-load line speeds for fast spooling
- 3-stage planetary geartrain for durable, reliable operation
- Low current draw for long duty cycles
- Compact shape with a separate control pack for versatile mounting
- Sliding ring gear freespool clutch and automatic direct drive cone brake
- Roller fairlead with 100′ of 5/16 diameter wire rope
- Remote control with a 12′ (3.7m) lead
Mounting the control pack
Because the control pack is separate from the winch, the two parts need their own mounting spots. Choose a dry, ventilated location for the control pack that keeps its connections short and away from the drum. Plan the cable runs before drilling, so the winch leads and the control leads do not cross the steering or pedal area.
The roller fairlead and the wire rope are the parts that wear, so inspect them regularly. Look for kinks, flattened strands and rough spots on the rope, and check that the roller turns freely. A worn roller can damage the rope and should be replaced before it causes a jam under load.
- Keep the control pack dry and ventilated
- Inspect the wire rope for kinks and flat strands
- Check that the roller turns freely
Specifications
| Brand | Warn |
|---|---|
| Model | XD9000 |
| Part number | 28500 |
| Part number details | PN 28500 CE (12V DC) |
| UPC | 12748012740 |
| Rated line pull | 9000 lbs (4080 kgs) single-line |
| Motor | 12V 4.6 hp Series Wound |
| Gear ratio | 156:1 |
| Geartrain | 3-stage planetary |
| Lubrication | Aeroshell #17 |
| Clutch (freespooling) | Sliding ring gear |
| Brake | Automatic direct drive cone |
| Drum diameter/length | 2.5/9.0 (6.4cm/23cm) |
| Weight | 78 lbs. (35 kgs.) |
| Wire rope | 100′, 5/16 diameter (30m, 8mm diameter) |
| Fairlead | Roller |
| Remote control | Remote, 12′ (3.7m) lead |
| Recommended battery | 650 CCA minimum for winching |
| Battery leads | 2 gauge, 72 (1.83m) |
| Finish | Argent Powder Coat |
| Nuts/bolts | PN 39625 |
Vehicle fitment
The XD9000 is a universal fit winch and is not tied to a specific make, model or year. Fitment depends on where the winch can be mounted and whether your electrical setup meets the battery requirement.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The control pack is separate from the winch, so plan both mounting locations before drilling. Winching needs a battery rated at least 650 CCA, and the specifications list 2 gauge battery leads at 72 (1.83m). Keep hands and clothing clear of the line and roller fairlead while the winch is under load.
What’s included
The specifications list a remote control with a 12′ (3.7m) lead, 100′ of 5/16 diameter wire rope (30m, 8mm diameter), a roller fairlead and nuts/bolts PN 39625.
Not included: A battery. Winching requires a battery rated at least 650 CCA, which is not part of this winch.












