Overview
The Rugged Ridge ORV Stabilizer 18475.03 is a single front steering stabilizer for the 2007–2018 Jeep Wrangler (JK), covering 2 and 4-door models in the manufacturer fitment list. It is a complete replacement kit with a 150PSI nitrogen charge.
Lifted Jeeps often benefit from a steering stabilizer, especially with larger tires and wheels. This ORV hydraulic design is built to dampen highway roughness and the vibration larger tires create, and it makes those tires easier to move on and off road.
Key features
- Single front stabilizer, complete replacement kit
- 150PSI nitrogen charge
- ORV hydraulic design that dampens highway vibration, per the maker
- Made for 2 and 4-door JK models
- Heavy-duty factory replacement design
Upgrading steering on a lifted JK
Larger tires change the forces on the steering, and a stabilizer helps control the wheel movement that results. It works best when the steering system is in good shape, because a damper cannot correct worn joints or a poor alignment. On a lifted Wrangler JK, the track bar and tie rod ends carry much of the load, so their condition matters.
Tire size, wheel offset and steering geometry all affect how a stabilizer feels. Plan the install around your current mounts, and confirm the stabilizer clears the track bar and steering components through full travel. Keep the boot in good condition, since it protects the piston rod from grit on trail use.
- Check track bar and tie rod ends before installing
- Confirm clearance through full steering travel
- Inspect the boot regularly on trail use
Specifications
| Brand | Rugged Ridge |
|---|---|
| Part number | 18475.03 |
| UPC | 804314165369 |
| Series | Replacement |
| Type | Complete kit |
| Position | Front |
| Single / dual | Single |
| Gas charge | 150PSI nitrogen |
| Shock boot | Not included |
| Brackets | Not included |
| Fitment type | Direct fit |
Vehicle fitment
The manufacturer fitment list includes 2007–2018 Jeep Wrangler (JK), with trims such as Rubicon, Sahara, Sport, Sport S and X, plus the Unlimited versions of those trims, including 70th and 75th Anniversary editions.
The list covers the JK generation only. Earlier TJ and LJ Wranglers and the later JL generation are not included. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The shock boot and brackets are not part of this kit, so plan on reusing mounts already on your JK or getting them separately. Keep hands clear of the stabilizer while the nitrogen charge is pressurized.
What’s included
One complete stabilizer unit.
Not included: shock boot and brackets.















