Overview
The Skyjacker Black Max B8500 steering stabilizer, part number 8500, is a single black front stabilizer with a double stud mount, offered as a direct fit replacement. The manufacturer fitment list covers a broad range of GM trucks and SUVs, the Ford F-150, Jeep CJ5, CJ7, Scrambler and the 2007–2018 Jeep Wrangler JK.
A steering stabilizer dampens road harshness and the shimmy that larger tires and wheels create at the steering. The Black MAX line matches the function of white body stabilizers in a black body. Replacing a worn stock stabilizer, or adding a second unit, is a common step for vehicles running larger tires.
Key features
- Single stabilizer with a double stud mount
- Black body and black shock boot included
- Front position, direct fit
- Replacement series from the Black MAX line
- Dampens steering shock and shimmy from larger tires
- Dual stabilizer setup suggested by Skyjacker
Steering stabilizer wear and care
A steering stabilizer works against side-to-side movement at the front axle, so it sees constant loads from bumps and tire imbalance. Over time the seals can wear, the mounts can loosen and the bushings can crack. A stabilizer that has lost its damping leaves the front wheels free to wander and shimmy, which can feel like a steering problem even when the rest of the steering is sound.
When fitting a new unit, check the mounting points on the axle and the tie rod or drag link where the stabilizer attaches. Worn joints add play that a new stabilizer cannot control. Recheck fasteners after the first few drives, and inspect the boot for tears so dirt does not reach the shaft.
Bigger tires change how the steering responds, so a stabilizer that was fine on stock tires may need more attention after a size change. Alignment and steering geometry should be checked after large tire upgrades, since a stabilizer does not correct geometry on its own.
Specifications
| Brand | Skyjacker |
|---|---|
| Part number | 8500 |
| UPC | 803696241364 |
| Model | Black Max B8500 |
| Series | Replacement |
| Type | Single |
| Mount | Double stud mount |
| Position | Front |
| Fitment type | Direct fit |
| Color | Black |
| Shock boot | Black shock boot included |
| Brackets | Not included |
| Hardware | Not included |
Vehicle fitment
It fits Cadillac Escalade, Escalade ESV and Escalade EXT; Chevrolet Avalanche, Silverado and Suburban; Chevrolet Tahoe; Ford F-150; GMC Sierra, Yukon and Yukon XL; Hummer H2; Jeep CJ5, CJ7 and Scrambler; and the 2007–2018 Jeep Wrangler (JK). Trim coverage varies by model.
Jeep Wrangler TJ, LJ and YJ, Cherokee and Grand Cherokee models, and Ford Super Duty trucks are not in this list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The double stud mount and the missing hardware mean the existing studs and fasteners on your vehicle must match before installation. Check the mounting points against the stock stabilizer first.
What’s included
One single black stabilizer with a double stud mount and black shock boot.
Not included: Brackets and hardware.









