Overview
The Rubicon Express 36mm Monotube Steering Stabilizer, part number RXJ2000B, is a front steering stabilizer for the 2007-2018 Jeep Wrangler JK. It is a bolt-on replacement for the factory unit and fits both two-door and four-door models.
The stabilizer uses a monotube gas pressure design, which Rubicon Express says eliminates foaming and cavitation in the damper. Its job is to reduce steering vibration and the wear it causes on steering components.
The steering stabilizer has a durable powder coat finish, which Rubicon Express says resists scratches and corrosion. It mounts in the front position on the JK.
Key features
- 36mm monotube design
- Gas pressure design that eliminates foaming and cavitation
- Reduces steering vibration and wear on steering components
- Durable powder coat finish
- OE replacement that bolts on in place of the factory unit
Steering stabilizer maintenance
A steering stabilizer damps the sudden movement of the front wheels, which is most noticeable on rough roads and at speed. Over time the damper seals can wear, the mounting bushings can crack, and the stabilizer can lose its ability to control shake. Check for leaks, loose brackets and clicking at the ends during routine inspection.
When replacing a stabilizer, inspect the tie rod ends, drag link and track bar at the same time. Worn steering components can reproduce the same vibration a stabilizer is meant to control. Tighten the mounting hardware to the vehicle’s specification and recheck it after the first few drives.
- Look for oil leaks around the damper body
- Check the mounting bushings for cracks
- Inspect nearby steering joints during replacement
Specifications
| Brand | Rubicon Express |
|---|---|
| Part number | RXJ2000B |
| UPC | 614901227987 |
| Diameter | 36mm monotube |
| Design | Monotube gas pressure |
| Finish | Powder coat |
| Position | Front |
| Installation | Bolt-on; re-use the factory hardware |
| Fitment type | Direct fit |
Vehicle fitment
It fits the 2007-2018 Jeep Wrangler (JK), in both two-door and four-door (Unlimited) models. It is not for the 2018-2022 Wrangler JL.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The stabilizer bolts on in place of the factory unit. Re-use the factory hardware.














