Overview
The Rugged Ridge 15001.65 is a set of 27 spline manual locking hubs with a polished aluminum finish, made for the 1990–1997 Ford Ranger.
These hubs are offered as a swap for factory automatic hubs, which can fail when they are needed most. The hub bodies are impact resistant nodular iron with a corrosion resistant die cast aluminum cap, and the knob is nylon. The driver gets out to lock them but does not have to wait for lost traction before four-wheel drive engages.
Rugged Ridge points out that a damaged automatic hub can render a 4×4 useless and leave the driver stranded, and that the only repair is replacement. The company presents manual hubs as a way to remove that risk on a truck such as the Ranger.
The 15001.65 fits every Ranger trim from 1990 to 1997, from the S and XL to the XLT and Splash, so one pair covers the whole range of those years. Unlocked, manual hubs are meant to improve fuel economy in 2WD.
The caps are die cast aluminum and the knobs are nylon. The cap is corrosion resistant, which helps long-term use.
Key features
- Manual locking hubs
- 27 splines
- Nodular iron body
- Die cast aluminum cap
- Nylon knob
- Polished aluminum finish
- Fits the 1990 to 1997 Ford Ranger
Engaging before the trail
A manual hub is most useful when it is locked before the trail gets rough, rather than after traction has already been lost. Lock both hubs with the vehicle stopped, then engage four-wheel drive while moving slowly. Keeping the hubs locked on the trail means the front axle is ready when a steep or slick section starts.
On a Ranger that spends time in mud or sand, the caps and knobs collect grit quickly. Rinse the hub area after water crossings, dry the caps, and check that the lock mechanism moves freely. Hubs that are cleaned and lubricated regularly are easier to engage and less likely to stick.
- Lock both hubs before the trail, not during it
- Rinse hub caps after water crossings
- Check lock mechanism movement at service
- Unlock before driving on pavement
Specifications
| Brand | Rugged Ridge |
|---|---|
| Part number | 15001.65 |
| UPC | 804314123314 |
| Part type | Manual locking hubs |
| Spline count | 27 splines |
| Body material | Nodular iron |
| Cap | Die cast aluminum |
| Knob material | Nylon |
| Finish | Polished aluminum |
| Fitment type | Direct fit |
Vehicle fitment
The 15001.65 fits this vehicle:
- 1990–1997 Ford Ranger (Custom, S, S Plus, STX, Splash, Sport, XL, XL Sport, XLT)
The fit covers the 1990–1997 Ranger. The 1999–2001 Ranger and other Ford trucks fall outside this part number’s range. Confirm fit for your vehicle’s year, model and trim before ordering.
Installation notes
These hubs lock by hand, so engage them before you need four-wheel drive rather than waiting for traction to be lost.









