Overview
The Rugged Ridge 15001.61 is a pair of 28 spline manual locking hubs made for Nissan trucks and SUVs: the 1990–1994 D21, 1995–1997 Pickup, 1998–2007 Frontier, 1990–2007 Pathfinder, 2004–2007 Titan and 2000–2007 Xterra.
The hardened nylon center is used instead of metal so the vehicle can keep moving if a hub fails. Nodular iron forms the body, a die cast aluminum cap covers it, and a nylon knob sits on top. Locked, the hubs are meant to give better 4WD performance than automatic hubs, and unlocked they are meant to improve 2WD fuel economy.
Nissan hubs with 28 splines were used on trucks and SUVs across almost two decades, so the fit range is wide. Each model has its own year range, so check it against your vehicle.
The pair has a polished aluminum finish, nylon knobs and die cast aluminum caps over nodular iron bodies, so the look and the construction are the same across the whole Rugged Ridge range.
Key features
- Pair of manual locking hubs
- 28 splines
- Hardened nylon center
- Nodular iron body
- Die cast aluminum cap
- Nylon knob
- Polished aluminum finish
- Fits D21, Pickup, Frontier, Pathfinder, Titan and Xterra
Matching the axle before buying
Nissan trucks and SUVs in this range used 28 spline axles across several model years, but a hub that fits one model may not fit another. Match the year and model first, then confirm the spline count on your axle before buying. A hub that fits a Pathfinder may still differ in body or bolt pattern from a Frontier, so check each vehicle separately.
Because these hubs take a lot of wear at the wheel end, inspect the hub center and knob for movement or damage at each service interval. Keep the mounting surface clean and lubricate the lock mechanism so it engages without force. Replacing both hubs at the same time keeps engagement consistent from side to side.
- Match year and model before buying
- Confirm the 28 spline count on your axle
- Inspect the center and knob at each service
- Replace both hubs together
Specifications
| Brand | Rugged Ridge |
|---|---|
| Part number | 15001.61 |
| UPC | 804314123307 |
| Part type | Manual locking hubs, pair |
| Spline count | 28 splines |
| Center | Hardened nylon |
| Body material | Nodular iron |
| Cap | Die cast aluminum |
| Knob material | Nylon |
| Finish | Polished aluminum |
| Fitment type | Direct fit |
Vehicle fitment
The 15001.61 fits these Nissan models:
- 1990–1994 Nissan D21 (Base, SE, XE)
- 1998–2007 Nissan Frontier (Base, LE, Nismo Off-Road, SC, SE, SVE, XE)
- 1990–2007 Nissan Pathfinder (LE, S, SE, SE Off-Road, XE)
- 1995–1997 Nissan Pickup (SE, XE)
- 2004–2007 Nissan Titan (LE, SE, XE)
- 2000–2007 Nissan Xterra (Off-Road, S, SE, X, XE)
Year ranges differ by model, so check the range for your own vehicle. Other Nissan trucks outside these ranges fall outside the fit. Confirm fit for your vehicle’s year, model and trim before ordering.
Installation notes
A manual hub is locked by hand, so the driver has to step out to engage four-wheel drive. Check that your axle uses 28 splines before ordering.









