Overview
The Trail Gear 140104-1 is an OEM Toyota manual locking hub, a part that locks a wheel to the axle by hand. Manual locking hubs can be hard to find at wrecking yards, and Trail Gear offers this one as a new replacement.
The hub is new and was made by the same maker that supplied Toyota’s factory hubs. It has a black powder-coat finish and a metal knob.
Key features
- New hub, not used
- 26 splines
- Metal knob
- Black powder-coat finish
- Labeled direct fit, with no vehicle named
Why hubs are hard to find
Manual locking hubs were used on many four-wheel-drive models, and original units wear out after years of exposure to road and trail conditions. When an original is hard to find, a new hub can be a practical option. Check the hub body, knob and splines carefully when it arrives to be sure it matches the original.
Powder-coat finishes resist chips and scuffs, but they can still wear where the knob is handled. Keep the hub clean and regrease its moving parts at regular intervals. Pair the hub with new gaskets during any installation so the seal works properly from the start.
- Compare the new hub with the original before fitting
- Inspect the powder coat for chips after installation
- Replace gaskets when the hub is removed
Specifications
| Brand | Trail Gear |
|---|---|
| Part number | 140104-1 |
| UPC | 70000621235 |
| Spline count | 26 splines |
| Knob material | Metal |
| Finish | Powder coat, black |
| Fitment label | Direct fit |
Vehicle fitment
Confirm fit for your vehicle’s year, model and trim before ordering. Compare the hub with your Toyota’s original part before installing.
Confirm your vehicle’s year, model and trim before ordering.
What’s included
Check the hub and hardware against your installation before starting.









