Overview
The Rugged Ridge Locking Hub in Polished Aluminum, part number 15001.08, is a pair of manual locking hubs with 16 splines for the 1960-1991 Ford F-250.
Rugged Ridge says these hubs are approved as original equipment by vehicle manufacturers and militaries worldwide. A hardened nylon center is used instead of metal to keep the vehicle moving in the rare case of a hub failure, and the only way to repair a damaged hub is to replace it.
Manual hubs are an alternative to factory automatic hubs. Rugged Ridge says they deliver better 4WD performance when locked and improved fuel economy in 2WD when unlocked, and that you have to get out of the cab to lock them.
Key features
- Manual locking hubs supplied as a pair
- 16 splines
- Hub body made of impact resistant nodular iron
- Corrosion resistant die cast aluminum cap, polished aluminum finish
- Hardened nylon center, nylon knob
- Rugged Ridge says they are approved as original equipment by manufacturers and militaries worldwide
- Locked by hand, so you do not wait for traction loss to engage 4WD
Manual hubs and driving habits
Manual locking hubs change how a truck moves between two-wheel and four-wheel drive, so the habit matters as much as the hardware. Lock the hubs before you engage the transfer case for four-wheel drive, and unlock them after returning to two-wheel drive so the front axle stops spinning with the driveline. Plan the locking routine before you need it on a trail, so the hubs are not fumbled in soft ground.
Because the hubs are operated by hand, check the knobs and locking mechanism regularly, especially after wading or deep mud. Water and grit can keep a hub from locking or unlocking. Rinse and lubricate the hubs as your vehicle requires, and watch for leaks, noise or wobble at the hub that signal wear.
- Lock hubs before engaging four-wheel drive
- Unlock hubs after returning to two-wheel drive
- Listen for noise or wobble that changes with speed
Specifications
| Brand | Rugged Ridge |
|---|---|
| Part number | 15001.08 |
| UPC | 804314123192 |
| Product type | Manual locking hubs |
| Quantity | Pair |
| Splines | 16 |
| Finish | Polished aluminum |
| Hub body | Nodular iron |
| Cap | Die cast aluminum |
| Knob material | Nylon |
| Center | Hardened nylon |
| Fitment type | Direct fit |
Check the hub size and weight against your build before ordering if those matter for your setup.
Vehicle fitment
The manufacturer fitment list for the Rugged Ridge 15001.08 hubs covers:
- 1960–1991 Ford F-250 (Base, Custom, Northland, Ranger, Ranger Lariat, Ranger XLT, XL, XLS, XLT, XLT Lariat)
It is for the 1960-1991 F-250 only. Later F-250 years and other Ford trucks are outside this fit. Check your vehicle’s year, model and trim before ordering.
Installation notes
- Professional installation is recommended for axle, driveline and transfer case work.
- Torque every fastener to the correct value for the axle and use the fluids your vehicle needs.
- Re-check fasteners and look for leaks after the first miles of driving.
What’s included
A pair of manual locking hubs. Check the package contents against your installation before starting.









