Overview
The Rubicon Express 3.5 Inch Lift Coil Springs are a rear coil spring set for a 3.5-inch rear lift. Rubicon Express sells them as a pair with a silver powder coat finish.
These coils are designed for ride quality while keeping durability and load capacity. Each coil is powder coated silver and tested against its specifications.
Key features
- 3.5-inch lift for the rear of the vehicle
- Silver powder coat finish on every coil
- Sold as a pair
- Rubicon Express says each coil is tested against its specifications
Coil spring height and handling
A coil spring carries part of the vehicle’s weight and sets the ride height at its corner. Raising the rear with a coil changes the suspension geometry, so the shocks, control arms and driveline angles all respond to the new height. The result can be a firmer or softer ride depending on the spring rate.
Look over coils after rough use for cracks near the ends, rust that has broken through the finish, and sagging on one side compared with the other. Replace springs in pairs so both sides of the rear axle keep the same height and load capacity.
Related parts are often checked when rear coils change. Brake lines and the parking brake cable may need slack checked, and shock length should be confirmed against the new height. Rear track bars and bump stops are commonly inspected at the same time to keep the axle controlled at full travel.
Specifications
| Brand | Rubicon Express |
|---|---|
| UPC | 614901437935 |
| Lift height | 3.5 inches |
| Mounting location | Rear |
| Finish | Silver powder coat |
| Sold as | Pair |
| Fitment type | Direct fit |
Vehicle fitment
It is a direct fit for a 3.5-inch rear lift. Coil springs are specific to each vehicle’s weight and rear axle, so verify your year, model and trim before buying these coils.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Changing the rear spring height changes the rear suspension geometry, so check the driveline angles and the shock length after installation.








