Overview
The Rubicon Express RE1215 is a 1.5-inch rear lift block with a U-bolt kit. Blocks like this add height to a vehicle without increasing spring rates, which is the reason for using them.
The blocks are for rear axles with a spring-over axle design only. The U-bolt kit includes four U-bolts and nuts and comes in several diameters and lengths.
Key features
- 1.5-inch rear lift block
- Four U-bolts and nuts
- U-bolts available in various diameters and lengths
- Spring-over rear axle design only
Before a rear lift
A rear lift block raises the axle on the spring seat, so the back of the vehicle sits higher while the springs keep their original rate. Because the rate does not change, the ride stays close to stock, but the driveline angles shift and deserve a check after installation. Spring-over axles carry the spring on top of the housing, which is why this block style is used on them.
Plan to re-check the U-bolt nuts after the first few drives, since clamp load settles as the parts seat. Look for stretched bushings, pinched brake lines and any wear on the U-bolts. Many builders replace worn U-bolts at the same time as the blocks, especially when the axle has been off-road hard.
- Check driveshaft angles after the lift
- Inspect U-bolts for stretching or corrosion
- Re-torque U-bolt nuts after initial drives
- Look for pinched brake lines at the axle
Specifications
| Brand | Rubicon Express |
|---|---|
| Part number | RE1215 |
| UPC | 614901437614 |
| Block height | 1.5 inches |
| Position | Rear axle |
| Axle design | Spring-over |
| U-bolts | Four, with nuts |
| Fitment | Direct fit |
Vehicle fitment
It fits rear spring-over axles. Confirm your vehicle’s year, model and trim before ordering, and confirm the axle design and U-bolt diameter.
Confirm your vehicle’s year, model and trim before ordering, and confirm the axle design and U-bolt diameter.






