Overview
The Rough Country Upper Windshield Light Bar Mount, part number R/C70503, holds a 50-inch LED light bar between the top of the windshield and the roof of a Jeep Wrangler TJ or LJ. It fits the 1997–2006 Jeep Wrangler TJ and the 2004–2006 Jeep Wrangler LJ.
The upper mount is steel with a modern design that spans the full width of the roof. It works with any standard 50-inch Off-Road LED Light and with Straight single-row and dual-row LED light bars that measure 50-5/16 inches from mounting point to mounting point. The light bar is not included, and the mount is sold as brackets only.
Key features
- Steel construction with a durable black powder coat
- Holds a 50-inch light bar across the full roof width
- Works with Straight single-row and dual-row LED light bars
- Designed for 50-5/16-inch mounting point spacing
- Brackets only, with no light bar in the package
- Mounts at the windshield cowl
Upper mount wiring and bar choice
An upper windshield bar sits high and close to the cowl, so the wiring and the bar’s footprint both need planning. Keep the harness away from the wiper arms and the vent openings, and secure it along existing trim so the wind does not pull on it at speed.
Choosing the bar matters as much as the mount. Confirm the bar is a Straight design with the right mounting spacing, and check that the light’s output and weight suit a single upper mount. Heavier bars put more strain on the cowl attachment, so inspect those points more often.
Once the bar is in place, check the aim on level ground and recheck it after the first few drives. Look for loosened bolts, rattles, and any movement at the mounting points.
- Keep the harness clear of the wipers
- Confirm the bar is Straight
- Check the aim on level ground
- Inspect the cowl attachment often
Specifications
| Brand | Rough Country |
|---|---|
| Part number | R/C70503 |
| Mount location | Windshield cowl |
| Light bar size | 50 inch |
| Mounting point spacing | 50-5/16 inches |
| Light bar style | Straight, single-row or dual-row |
| Construction | Steel |
| Finish | Durable black powder coat |
| Sold as | Brackets only |
| Fitment listing | Direct Fit |
Vehicle fitment
It fits the 1997–2006 Jeep Wrangler TJ in the 65th Anniversary, Rubicon, SE, Sahara, Sport and X trims, and the 2004–2006 Jeep Wrangler LJ in the Unlimited and Unlimited Rubicon trims.
JK models from 2007 and JL models are not covered. Confirm your TJ or LJ model year and trim before fitting this mount.
Installation notes
Route light bar wiring through a fused relay, and check local rules for road-use lighting. The mount is designed for Straight bars, so curved light bars are not supported.
What’s included
The mount is sold as brackets only, so the 50-inch light bar is a separate purchase.









