Overview
The Rough Country Lower Windshield Black Series LED Ditch Mounts with Spot Beam, part number 71028, are LED light cubes that mount along the base of the windshield on the Ford F-150. The kit is made for the 2015–2026 Ford F-150 and gives side illumination for off-road driving at night.
Each LED cube is rated at 36 watts and 2880 lumens with a spot beam, and it is IP67 waterproof. The kit comes with a braided wiring harness that has an in-line fuse and an on/off switch. The mounting system is low profile and does not interfere with the washer nozzle or spray pattern.
Key features
- Black Series LED cubes with spot beam
- 36 watts and 2880 lumens
- IP67 waterproof cubes
- Braided wiring harness with in-line fuse and on/off switch
- Low profile cowl mount
- Does not interfere with washer nozzle or spray pattern.
Windshield mount installation
A bolt-on mount avoids cutting the cowl, which keeps the factory finish intact and makes removal simple if you sell the vehicle. Before mounting, clean the cowl surface and check that the cubes clear the wiper arms and hood latch at full sweep. Route the harness along existing body channels so cables stay away from wiper linkage.
Spot beam cubes throw a focused light that reaches farther down the trail than a wide flood, so aim them slightly down and outward to match the spot pattern. Windshield lights take a lot of vibration, so recheck the bolts after the first few trail runs and inspect the cube seals for water intrusion after car washes or creek crossings.
- Clear wiper arms before tightening
- Route harness away from moving parts
- Check cube seals after water crossings
- Keep the in-line fuse accessible
Specifications
| Brand | Rough Country |
|---|---|
| Part number | 71028 |
| Light series | Black Series |
| Light type | Light pod, cube |
| Size | 2 inch |
| Watts | 36 |
| Lumens | 2880 |
| Beam pattern | Spot |
| Mounting location | Cowl |
| Waterproof rating | IP67 |
| Installation | 100% bolt-on, no cutting or drilling |
| Use | Off-road use only |
Vehicle fitment
Its fit covers the 2015–2026 Ford F-150 only, not the 2014 and earlier F-150 or the 2023 and later models.
The kit is for off-road use only. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The kit is bolt on and needs no cutting or drilling, and the in-line fuse and on/off switch are part of the harness. Check local rules on windshield-mounted lights before using them on public roads.
What’s included
Lower windshield ditch mounts with LED light cubes, a braided wiring harness, in-line fuse and on/off switch.

















