Overview
The Rough Country 2-inch wheel spacer in red, part number R/C1101RED, is built for a 6 on 5.5 bolt pattern. A spacer like this pushes the wheel outward on the hub, widening track width. It is designed for GM models.
Apart from color, its specifications match the clear R/C1101. Confirm the 6 on 5.5 bolt pattern against your hub before fitting it to any vehicle.
Key features
- Red color
- 2-inch thickness
- 6 on 5.5 bolt pattern
- Aluminum construction
Color, finish and fit
A red finish changes only the appearance of the spacer. The bolt pattern, hub bore and thickness decide whether it mounts correctly, so color should be chosen last. Painted surfaces can be marked by rough tire tools and wire brushes, so clean the hub face with a soft cloth before installing.
A spacer sits on the hub held only by friction and the studs, so the mating surfaces must be clean and undamaged. Look for chips in the finish near the bolt holes and the hub face. Light scratches on the outside can be touched up, but damage to the mounting faces is a reason to replace the spacer. Confirm wheel fit and torque on the vehicle before regular use.
Specifications
| Brand | Rough Country |
|---|---|
| Part number | R/C1101RED |
| Type | Wheel spacer |
| Thickness | 2 inch |
| Bolt pattern | 6 on 5.5 |
| Material | Aluminum |
| Color | Red |
| Fitment | Universal fit |
Vehicle fitment
The spacer is designed for GM models. Confirm the model and year before fitting.
Makes other than GM are outside its design. Check your year, model and trim before ordering.
What’s included
The title describes one red spacer.
Not included: studs and lug nuts, to be checked against the spacer before installing.









