Overview
The Rough Country 2-inch wheel spacer, part number R/C1101, is built for a 6 on 5.5 bolt pattern. Spacers of this type move the wheel outward on the hub, which widens track width. It is designed for GM models.
It is made of 6061 aluminum with a clear finish. Check that the six-lug 6 on 5.5 pattern matches your hub before buying.
Key features
- 2-inch thickness
- 6 on 5.5 bolt pattern
- 6061 aluminum construction
- Clear finish
- Universal fitment listed
Fitment for GM-pattern hubs
Six-lug hubs with a 6 on 5.5 pattern appear on a range of GM applications, but the pattern alone does not confirm a fit. Hub bore, stud thread and seat type must also match. A spacer that is centered by the hub bore carries load more safely than one that relies only on the studs.
Two-inch spacers change the wheel position enough to affect brake caliper clearance and the steering arm. Check that the caliper and hose can move freely at full lock. Clear aluminum can show scuffs over time, so inspect the surface for wear and corrosion regularly. Wheel bearings may also feel different when the wheel sits farther out. Keep the hardware with the spacer it was fitted to.
Specifications
| Brand | Rough Country |
|---|---|
| Part number | R/C1101 |
| Type | Wheel spacer |
| Thickness | 2 inch |
| Bolt pattern | 6 on 5.5 |
| Material | Aluminum (6061) |
| Color | Clear |
| Fitment | Universal fit |
Vehicle fitment
Fitment is universal. It is designed for GM models, but the specific model and year must be confirmed before fitting.
Other makes are outside the intended GM application. Check your year, model and trim before ordering.
Installation notes
A 2-inch spacer changes wheel position, so check that studs or lug nuts still engage fully and that fender and brake clearance is adequate after installation.
What’s included
The title describes one spacer.
Not included: wheel studs and lug nuts, to be checked against the spacer before installing.









