Overview
The California Super Trucks CSR-A27-2 is a billet shock clamp for reservoir shocks. It is sized for reservoir shocks in the 2.0 to 2.0 range and is universal fit.
Because no vehicle is named, this clamp is best matched by shock size rather than by model. Measure your shock before ordering to confirm it falls within the stated range.
Measuring your reservoir shock
A reservoir shock has a separate canister joined to the main body by a hose, so the clamp grips only the body. Accurate measurement of the body at the clamp location matters, because a clamp that is even slightly undersized will slip under load.
Clearance deserves attention too. The reservoir, its hose and any nearby brackets must stay clear of the clamp and the tire path at full compression. Route the hose so it does not rub the clamp edges, and check for contact after the first few drives.
Billet parts resist corrosion better than many cast parts, but exposed fasteners still rust. A thin coat of anti-seize on bolt threads makes future removal easier.
- Measure the body at the clamp location
- Check hose clearance at full compression
- Use anti-seize on bolt threads
Specifications
| Brand | California Super Trucks |
|---|---|
| Part number | CSR-A27-2 |
| UPC | 70000671586 |
| Material | Billet |
| Shock compatibility | Reservoir shocks, 2.0 to 2.0 |
Vehicle fitment
Fitment is listed only as universal fit. No vehicle years, makes or models are named.
Confirm your vehicle’s year, model and trim before ordering.









