Overview
The Daystar KU71092 is a weld-on end for Stinger bump stops that keeps the bumpers retained in the tube once the bump stops are set up. It is universal in application and is not tied to a specific vehicle model.
Each end is an individual piece and must be welded in place, which makes it a fabrication part for builders rather than a bolt-on accessory.
Key features
- Universal application across Stinger bump stop setups
- Built to fit Stinger bump stops
- Urethane bump material noted in the fitment details
- Requires welding for installation
- Keeps bumpers retained in the tube after setup
Bump stop setup and welding
Bump stops limit how far the suspension can compress, and the material they use shapes how they cushion impacts at the end of travel. Urethane bump material wears over time from heat, sun and repeated compression, so it can crack or lose its shape. Inspect the bump stop and its retainers periodically to check that the bumpers still sit firmly in the tube.
Because each end is welded into position, plan the layout before striking an arc. Set the bump stops and mark the tube before welding so the ends sit square and do not pull the bumper out of line. Protect the urethane from weld heat and spatter, and allow the weld area to cool before the bumper is reinstalled.
- Set up the bump stops before welding each end
- Protect urethane from weld heat and spatter
- Inspect bumpers for cracks during routine checks
Specifications
| Brand | Daystar |
|---|---|
| Part number | KU71092 |
| UPC | 814423019996 |
| Application | Universal |
| Compatible with | Stinger bump stops |
| Bump material | Urethane |
| Installation | Welding required |
Vehicle fitment
Fitment is tied to the Stinger bump stop system rather than to a year, make and model.
Confirm your vehicle’s year, model and trim before ordering. Confirm the bump stop system matches this end before welding.
Installation notes
Set up the Stinger bump stops first, then weld each end into position. Use a welder rated for the metals involved and wear eye protection while welding.
What’s included
One individual weld-on end per unit.
Not included: Stinger bump stops and any welding equipment.











