Overview
The Bestop Highrock 4×4 Modular Front Bumper in black, part number 44945-01, is a steel front bumper center section for the 2007–2018 Jeep Wrangler (JK). Bestop makes it the starting point of a modular bumper system: End Caps, a Skid Plate, a Tubular Grille Guard or an Approach Roller kit can be added later, and each of those is optional and sold separately.
Bestop designed this front bumper around off-roaders who plan to fit a winch and extra lighting. The high-access shape gives more clearance over rocks and trail obstacles, and Bestop says any component of the system can be replaced individually if it is damaged.
Key features
- Modular front bumper center section that accepts optional End Caps, Skid Plate, Tubular Grille Guard and Approach Roller kit
- 3/16 inch thick steel construction for rock crawling and rough trails
- High-access shape for more clearance over rocks and obstacles
- Recessed winch compartment with a base plate, so the winch sits lower and leaves more room overhead for a grille guard or other accessories
- Electrostatically applied E-coat base layer under a matte-black powder-coat top finish, for resistance to corrosion, nicks, scrapes and scratches
- Bolt-on installation at the existing factory bumper mounting locations, with no drilling
- Works with factory fog lights; a wiring connector extension is included
- One-year limited warranty
Choosing a winch setup
A winch on a front bumper adds the most value when mounting and wiring are planned before the bumper goes on. The recessed compartment and base plate give a dedicated place for the winch, but the winch’s weight, cable length and electrical draw still need to match the vehicle’s electrical system and cooling. Route the power cable with fuse protection near the battery and keep it clear of hot and moving parts.
Bumper-mounted accessories also change the vehicle’s front weight and approach geometry. Adding a skid plate, grille guard or lights later can shift the balance, so plan the accessory set as a whole. Check that steering, the radiator and the air intake keep clearance once everything is installed, and re-check the bolts after the first off-road sessions.
- Plan winch cable routing before mounting
- Confirm the electrical supply and fusing
- Re-check bumper bolts after the first trail runs
Specifications
| Brand | Bestop |
|---|---|
| Part number | 44945-01 |
| UPC | 77848131760 |
| Product type | Modular front bumper center section |
| Position | Front |
| Width | Mid (center section) |
| Material | Steel |
| Steel thickness | 3/16 inch |
| Finish | Black powder coat over an E-coat base layer |
| D-ring mount | Included |
| Light mounts | Included |
| Winch mount | Included, recessed compartment with base plate |
| Fitment type | Direct fit |
| Warranty | One-year limited |
Vehicle fitment
The Bestop Highrock 4×4 Modular Front Bumper covers the 2007–2018 Jeep Wrangler (JK), in both two-door and four-door models.
The bumper is for the JK generation only, so earlier Wrangler TJ and later JL models are outside this fit. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The bumper bolts to the existing factory bumper mounting locations and does not need drilling. Bestop includes a wiring connector extension so the factory fog lights can stay connected.
Any winch is separate from the bumper; the recessed compartment and base plate are built to take one.
What’s included
The bumper center section with its D-ring mount, light mounts, winch mount and the fog light wiring connector extension.
Not included: End Caps, Skid Plate, Tubular Grille Guard, Approach Roller kit and other accessories, which are sold separately.
















