Overview
The Road Armor 47014B is a Stealth series winch front bumper for the 1997–2002 Dodge Ram 2500 and 3500. It has a Pre-Runner guard and a satin black powder coat finish.
The winch mount houses a non-integrated winch up to 12k; Road Armor says some applications can mount a 16.5 Warn and asks buyers to call about specific year, make and model. Recessed pods are sized for dual 4-inch-diameter lights, with PIAA 510 or Warn 350F recommended for most applications. Lights are not included.
Key features
- Pre-Runner guard
- Recessed pods for dual 4-inch-diameter lights
- Winch mount for up to a 12k non-integrated winch
- Fully welded front and back shackle mounts
- Faceted 3/16 outer shell with 1/4-inch-thick internal brackets and gussets
- Guard tubing with .120 wall
- The bumper carries a lifetime guarantee against breakage.
Choosing and mounting a winch
A winch bumper carries the weight of the winch and the pulling load at the front of the truck, so the mount and the frame it bolts to matter as much as the bumper itself. Before installing, match the winch’s rated capacity and bolt pattern to the winch mount, and route the cable through the fairlead so it does not rub the guard or grille. Use the correct hardware grade and tighten each fastener to the value for your truck.
Recessed pods add wiring that needs the same care. Run harness lines away from moving parts and the winch cable path, and seal connectors against road spray and mud. Off road, a pre-runner guard protects the front of the truck from brush and rock, but it does not replace careful line selection on tight trails where the bumper can catch.
- Winch rating matched to the mount
- Wiring routed clear of the cable path
- Fasteners rechecked after the first trail outing
- Recovery shackles rated above the expected load
Specifications
| Brand | Road Armor |
|---|---|
| Part number | 47014B |
| UPC | 70000267649 |
| Series | Stealth |
| Position | Front |
| Width | Full |
| Material | Steel |
| Finish | Satin black powder coat |
| Guard | Pre-Runner |
| Light mounts | Included |
| Winch mount | Included, up to 12k non-integrated winch |
| D-ring mount | Included |
| Fit type | Direct fit |
Vehicle fitment
It fits the 1997–2002 Dodge Ram 2500 and 3500.
Check the year, model and trim against your truck before ordering, especially for the Ram 1500 or Ram models from 2003 onward.
What’s included
- Front bumper with Pre-Runner guard
- Winch mount
- Light mounts
- D-ring mount
Not included: Winch and lights.









