Overview
The Fab Fours Premium FS17-A4150-1 is a front winch bumper with a full guard for the 2017 to 2018 Ford F-250 Super Duty and F-350 Super Duty. It is a 3/16-inch steel bumper with a 2 stage black powder coat that accepts winches up to 16,500 lb.
The Premium winch bumper is built for strength and durability and provides far more tire clearance to eliminate rubbing. It keeps the front parking sensors in place and has integrated fog and turn lights, with 3/4-inch thick D-ring mounts that hold up to a 7/8-inch shackle.
A 2-piece mounting system is adjustable, allowing a custom fit. Fab Fours gives the weight as 230 to 270 lbs.
Key features
- Full guard winch bumper for 2017 to 2018 Ford F-250 and F-350 Super Duty
- Winch ready for winches up to 16,500 lb
- 3/4-inch thick D-ring mounts holding up to a 7/8-inch shackle
- Retains front parking sensors
- 90mm fog lights and 60mm turn indicator lights included
- Injection molded light housings
- Adjustable 2-piece mounting system
- 3/16-inch steel with 2 stage black powder coat
- Made in the USA
Living with a winch bumper
A front winch bumper changes how the truck carries weight at the front end and how it handles approach angles on the trail, so the bumper and winch should be considered together. Match the winch to the rated capacity of the mount and keep the cable, fairlead and hook in good condition. Inspect the cable for fraying or kinks after each recovery and replace it when strands are damaged.
Factory park assist hardware should be checked after installation, since the sensors need to face the correct direction and stay free of mud. Keep the fog and turn light connectors clean and confirm that the lights switch on with the truck’s controls. Re-check the mounting bolts after rough trail use, because a bumper under winch loads can loosen over time.
- Check sensor alignment after installation
- Inspect cable and hook after each pull
- Re-check bolts after rough trail use
Specifications
| Brand | Fab Fours |
|---|---|
| Part number | FS17-A4150-1 |
| UPC | 5810112233 |
| Product type | Premium front winch bumper with full guard |
| Position | Front |
| Width | Full |
| Material | Steel, 3/16-inch |
| Finish | 2 stage black powder coat |
| Weight | 230-270 lbs. |
| Winch capacity | Up to 16,500 lb |
| D-ring mounts | 3/4-inch thick, hold up to a 7/8-inch shackle, included |
| Lights | 90mm fog lights and 60mm turn indicators, included |
| Winch mount | Included |
| Parking sensors | Retained |
Vehicle fitment
It fits the 2017 to 2018 Ford F-250 Super Duty and 2017 to 2018 Ford F-350 Super Duty.
Earlier Super Duty years, such as 2016 and before, are not covered by this part, so check the year before buying.
Installation notes
The 2-piece mounting system adjusts for a custom fit. The bumper retains the front parking sensors, so the factory sensors stay in service after installation.
What’s included
- Front winch bumper with full guard
- 3/4-inch thick D-ring mounts
- 90mm fog lights
- 60mm turn indicator lights
- Winch mount
Not included: The winch, shackles and wiring.














