Overview
The Rigid Industries 360-Series 4 inch SAE LED Fog Lights, part number 36110, are a set of two round 4-inch LED lights with a white backlight and an SAE fog beam pattern. They are universal fit surface mount lights with a limited lifetime warranty.
The 360-Series projects up to 8,600 raw lumens through an optimized beam and has an aluminum housing with a blacked-out circuit board. Beam patterns run from 17 degrees to 60 degrees, and backlight colors are red, white, blue or amber.
The 360-Series is built for surface mounting on many vehicles. The housing is aluminum, the circuit board is blacked out, and the lights carry RIGID branding. The set comes with a limited lifetime warranty. Because the harness is sold separately, plan the wiring before buying so the switch, relay and fuse match the set. The mounting spot needs to be clear of the bumper contours.
Key features
- Up to 8,600 raw lumens
- Aluminum housing with a blacked-out circuit board
- Beam patterns from 17 to 60 degrees
- Backlight options: red, white, blue or amber
- SAE fog beam pattern
- Limited lifetime warranty
Surface mounting basics
Surface mounts keep the housing in front of the bumper rather than cutting into it, which makes them a practical choice for many vehicles. Plan the bracket spot first, then check that the lens can be aimed without touching the bodywork. Use sealed fasteners and a light coat of anti-seize on threaded parts if the bracket is steel.
Because the harness is sold separately, wiring is the step to plan before anything is mounted. Choose a switch and relay that match the set’s load, and route the cable so it is protected from stones and moving parts. A set of two should match in height and aim, so check both lights side by side once they are fixed in place.
- Plan the switch and relay before mounting
- Keep the cable away from moving parts
Specifications
| Brand | Rigid Industries |
|---|---|
| Part number | 36110 |
| Light series | 360-Series |
| Size | 4-inch round |
| Light type | LED |
| Mounting location | Surface |
| Backlight color | White |
| Beam pattern | SAE fog |
| Sold as | Set of two |
| Type | Driving light |
Vehicle fitment
Universal fit. The 360-Series round lights are surface mounted, so the location and bracket determine where they go on the vehicle.
Check the surface mount location and the harness before ordering, since the harness is sold separately.
Installation notes
The harness is sold separately, so order the wiring that matches your switch and relay setup. Mount the lights level and aim them low for fog use.
What’s included
A set of two 360-Series 4-inch lights. The harness is sold separately.
Not included: Wiring harness.












