Overview
The Rigid Industries 41020 is a 1.00 inch tube mount system with three-piece adjustable clamps, built to hold E-series lights on 1.00 inch tubing. Rigid says its clamp system works on tubing from 1.00 to 2.25 inch, and this kit is sized for the 1.00 inch end of that range.
Mounting options are available for Jeeps, side by sides, motorcycles and ATVs. Fit depends on tube diameter, so measure the tube before choosing this kit over a larger size.
Key features
- Three-piece adjustable clamps
- Mounts to 1.00 inch tubing
- Fits E-series lights
- Part of Rigid’s clamp system, which covers tubing from 1.00 to 2.25 inch
- Black finish
Choosing a tube size
Tube mounts like this one take their strength from a snug fit. Before tightening anything, check that the clamp sits square on a round tube with no flat spots or dents, because a bent section can let the light rotate under load. Measure with a caliper at the clamp location rather than relying on a nominal size.
Light position matters as much as the clamp. Aim the fixture so the lens is not blocked by roll bar cross members, and keep the wire loom clear of moving parts. Check clamp torque after the first few off-road sessions, since vibration can loosen clamp bolts over time.
- Measure the tube at the clamp point
- Check clamp bolts after rough trail use
- Keep wiring clear of hinges and steering
- Replace clamps that show cracks or stripped threads
Specifications
| Brand | Rigid Industries |
|---|---|
| Model number | 41020 |
| UPC | 815711015096 |
| Color | Black |
| Tube diameter | 1.00 inch |
| Clamp style | Three-piece adjustable clamps |
| Light compatibility | E-series lights |
| Clamp system range | 1.00 to 2.25 inch tubing |
Vehicle fitment
Fit comes down to tube size. Confirm the 1.00 inch diameter on your roll bar or tube before ordering.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Light fixtures should be wired through a fused relay, and local road-use rules apply to auxiliary lighting, so check those before mounting E-series lights on the bar.
What’s included
Three-piece adjustable clamp set for 1.00 inch tubing.
Not included: Light fixtures are not part of this kit.
