Overview
The Rigid Industries 49002 is an SR-Q down angled flush mount kit that lets you angle an SR-Q flush mount LED light by 15 degrees up or down. It is universal fit and is not tied to a particular vehicle.
The kit is an accessory for the Rigid Industries SR-Q flush mount LED light. Check the mounting hardware and finish against your installation before starting.
Key features
- Angles an SR-Q flush mount LED light 15 degrees up or down
- For the Rigid Industries SR-Q flush mount light
- Universal fit listing
Angling a flush mount
An angled mount changes where the light points without moving the vehicle mounting, which is useful when a flush mount sits too high or too flat for the work. Aim the adjusted light before final tightening, and check the beam on a wall or on the ground ahead with the vehicle parked on level ground. Small changes make a big difference at the far end of the beam, so adjust in steps.
Wiring and mounting surfaces matter as much as the angle. Use weatherproof connectors and a fused, relayed circuit, and route the leads away from heat and moving parts. Check that the mounting surface is flat and solid, since a flexing panel can shift the aim over time. After the first drives, re-check the hardware and the aim together.
- Aim on level ground before tightening
- Use weatherproof connectors
- Check the surface for flex
Specifications
| Brand | Rigid Industries |
|---|---|
| Part number | 49002 (also RIG49002) |
| UPC | 849774001284 |
| Product type | Angled flush mount kit |
| Adjustment | 15 degrees up or down |
| Compatible light | SR-Q flush mount LED |
| Fitment type | Universal fit |
Vehicle fitment
It is made for the SR-Q flush mount LED light, not for a particular vehicle. Confirm your vehicle’s year, model and trim before ordering.
Check that your light is the SR-Q flush mount model and that your mounting surface suits a flush mount. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Wire auxiliary lights with a fused, relayed circuit sized for the load, using weatherproof connectors and secure routing away from heat and moving parts. If you are unsure about the wiring, have a qualified installer do it.
- Mount the light securely and aim it so it does not dazzle other drivers.
- Check your local regulations for auxiliary lighting use on public roads, and cover or switch off lights where required.
- Disconnect the battery before working on the wiring.
- Re-check mounting hardware and connections after the first miles of driving.
What’s included
An SR-Q angled flush mount kit. Check the package contents against your installation before starting.
Not included: The SR-Q LED light itself and wiring are not included.











