Overview
The Rhino-Rack RL Leg (x2), part RL150S2, is a heavy duty leg that fits a roof rack to the gutter mounts on a vehicle. It measures 5.9 inches and is sold as a pair. It fits the 1997 to 2006 Jeep Wrangler TJ, the 1970 to 1974 and 1987 to 1994 Land Rover Range Rover, and the 1993 Land Rover Range Rover Sport.
Key features
- Heavy duty leg that fits to gutter mounts
- Measures 5.9 inches
- Sold as a pair
- Part of the RL series, with 110 mm, 150 mm, 210 mm and 280 mm heights
Legs for older 4x4s
Older 4x4s and luxury SUVs often have roof structures that differ from modern vehicles, so the leg has to match the gutter mount shape as well as the vehicle year. Before fitting, look at the gutter or rail the leg clamps to, and make sure it is sound, clean and free of previous damage. Rust and old sealant can change how the leg sits.
Vehicles of this age are often driven on rough roads and in wet conditions, which puts extra strain on rack hardware. Inspect the legs for cracked welds or bent sections, and check the gutter mount for corrosion or flexing. Replace worn parts as a pair so both legs carry the same load. After the first drives, re-check the clamp tightness and listen for movement that suggests the mount is loosening.
- Clean the gutter mount before fitting
- Check both legs for even height
- Re-tighten after the first few trips
Specifications
| Brand | Rhino-Rack USA |
|---|---|
| Part number | RHORL150S2 |
| Measurement | 5.9 inches |
| Quantity | Pair |
| Fitting point | Gutter mounts on the vehicle |
Vehicle fitment
The RL150S2 fits the 1997 to 2006 Jeep Wrangler TJ, the 1970 to 1974 and 1987 to 1994 Land Rover Range Rover, and the 1993 Land Rover Range Rover Sport.
Range Rover years outside those listed, and Wrangler models from other generations, are not covered. Confirm your vehicle’s year, model and trim before ordering.
What’s included
A pair of RL 5.9 inch legs.









