Overview
The Rhino-Rack Backbone 3 base mounting system (RFJB1) is a steel roof rack for the Toyota FJ Cruiser. It connects to the roof through three bases on each side, and a Rhino-Rack Pioneer System can be fitted on top. It fits the 2007 to 2014 Toyota FJ Cruiser, and installation requires drilling.
Key features
- Three roof bases on each side of the vehicle
- Black powder coat finish on a steel frame
- Four planks and cross bars included in the kit
- Carries a Rhino-Rack Pioneer System on top
Planning the installation
Fitting a steel roof frame is a larger job than bolting on a light accessory. The bases are attached to the roof, which means holes must be placed accurately and sealed afterwards to stop water entering the cabin. Mark the positions with the frame held in place, and keep the work area clear before drilling.
A black powder coat finish protects the steel, but chips from fitting can expose bare metal. Touch up any scratches promptly to limit rust. Check the bars and frame for flex before loading the roof, and keep the load within the rack’s rating for the full setup.
- Mark drill positions before cutting
- Deburr holes and seal them after drilling
- Touch up chips in the powder coat promptly
- Tighten all fasteners in stages
Specifications
| Brand | Rhino-Rack USA |
|---|---|
| Part number | RHORFJB1 |
| Width | 47 inches |
| Length | 58 inches |
| Height | 2 inches |
| Material | Steel |
| Finish | Black powder coat |
| Roof rack type | Roof rack |
| Planks | 4 |
| Cross bars included | Yes |
| Installation | Drilling is required |
Vehicle fitment
It is a direct fit for the 2007 to 2014 Toyota FJ Cruiser. The bases are matched to that vehicle’s roof, so the rack is not a universal part.
The list does not include the 2015 and later FJ Cruiser model years or any other Toyota model. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Drilling is required to fit the bases to the roof of the FJ Cruiser, so plan for it before the bases are fitted.
What’s included
The base mounting frame with four planks and cross bars.
Not included: the Rhino-Rack Pioneer System that is fitted on top.









