Overview
The Rhino-Rack QuickMount Canopy Mount, part number RHOQMCM02, is a set of internal backing mounts that let a Quick Mount RLT600 leg attach to a canopy. Rhino-Rack USA sizes this kit for one bar, since it includes two mounts. It is a canopy accessory rather than a vehicle-specific part, so compatibility depends on the canopy and the RLT600 leg.
A foam pad comes with the mounts. Cut it to size during setup so canopy paint is not damaged. The kit carries a Universal Fit designation and is not built around any single vehicle.
Key features
- Internal backing mounts for a Quick Mount RLT600 leg
- Two mounts included, sized for one bar
- Foam pad supplied to protect canopy paint
- Universal Fit designation from Rhino-Rack USA
Canopy paint and mount contact
Canopy mounts sit against the inside of the canopy, so the contact surface is what protects the paint. A foam pad between the mount and the canopy spreads the pressure and reduces rubbing. Clean both surfaces before fitting, because grit trapped under the pad can leave marks as the canopy flexes.
Canopies are made in a range of shapes and thicknesses, so check that the mount sits flat against the panel before tightening. Look for gaps or rocking that suggest the pad needs trimming or the mount needs repositioning. Revisit the fit after the first few drives, since flex in the canopy can change how the mounts sit. Keep the pad dry and replace it if it begins to crush or tear, since a worn pad offers less protection.
- Clean both surfaces before fitting
- Recheck the fit after the first drives
Specifications
| Brand | Rhino-Rack USA |
|---|---|
| Part number | RHOQMCM02 |
| Category | Exterior Parts |
| Mounts included | 2 |
| Bars supported | 1 bar |
| Leg type | Quick Mount RLT600 |
| Fitment | Universal Fit |
Vehicle fitment
This is a Universal Fit canopy mount, so it is not tied to a particular vehicle. Match the mounts to your canopy and RLT600 leg, and confirm fit for your year, model and trim before ordering.
Match the mount to your canopy and RLT600 leg before buying, because the kit is not sold for any single vehicle. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Cut the foam pad to size before fitting the mounts so the canopy paint is protected.
What’s included
Two internal backing mounts and one foam pad, which is cut to size before use.
Not included: Quick Mount RLT600 legs and bars, since the mounts are used to fit a leg onto a canopy.











