Overview
The Rhino-Rack Roof Rack Roller, part number RR1375, is an alloy roller that helps you get ladders on and off Rhino-Rack Heavy Duty roof racks with only a small amount of effort. It attaches to your crossbar and offers a lower-cost route to loading a ladder without buying a full ladder system.
The roller is made from heavy-duty alloy and comes with a black plastic cover. It is designed to suit a Rhino-Rack Heavy Duty crossbar measuring 1375mm (54 inches), with a roller length of 1305mm (51 inches) that leaves room for the mounting brackets.
Key features
- Heavy-duty alloy construction
- Black plastic cover supplied
- Attaches to a Heavy Duty crossbar without a full ladder system
- Helps load ladders onto roof racks with little effort
Using a roller with ladders
A roller takes some of the effort out of sliding a ladder onto a roof rack, because the ladder rolls across the bar instead of being lifted over it. The roller sits on the crossbar, so the bar’s size and the roller’s length decide how the setup fits together. Keep the ladder centred on the roller and move it slowly so the bar is not knocked out of place.
Good preparation makes loading easier. Clean the roller surface before use, check that the mounting brackets are tight, and make sure the ladder can be secured once it sits on the rack. Ladder weight and length should suit the rack and your vehicle, so confirm both before loading. Regular checks help catch cracks in the cover or loose fixings early.
- Clean the roller before each use
- Check the brackets are tight before loading
- Secure the ladder fully once it is on the rack
- Replace the cover if it cracks or splits
Specifications
| Brand | Rhino-Rack USA |
|---|---|
| Part number | RR1375 |
| Crossbar size | 1375mm (54 inches) |
| Roller length | 1305mm (51 inches) |
| Material | Heavy-duty alloy |
| Cover | Black plastic |
Vehicle fitment
The roller is sized for a Rhino-Rack Heavy Duty crossbar of 1375mm (54 inches), and it is not tied to a specific vehicle. The crossbar size is the main check.
Check that your roof rack uses a Rhino-Rack Heavy Duty crossbar of 1375mm (54 inches) before ordering. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Attach the roller to the bar, then roll the ladder onto the rack. The 1305mm length leaves room for the mounting brackets.
What’s included
The roller comes with a black plastic cover. Check the package contents against your installation before starting.
Not included: the Rhino-Rack Heavy Duty crossbar the roller attaches to, which must measure 1375mm.









