Overview
The Rhino-Rack Backbone 5 base mounting system (RF2B2) is a steel roof mounting frame for the Ford Super Duty Super Cab. Five bases sit on each side of the roof, and a Rhino-Rack Pioneer System is fitted on top. It fits the 2018 and 2019 Ford F-250 and F-350 Super Duty. The F-450 is not a covered model.
Key features
- Five roof bases on each side of the vehicle
- Steel construction with a black powder coat finish
- Designed as a roof rack accessory for a Pioneer System
- Drilling is required for installation
Cross bars and drilling
Cross bars are a separate purchase with this frame, and they determine how the rack holds gear. Bars should be sized to the frame’s width and sit squarely across the bases. Bars that are too long or too short can cause uneven loading and movement on the road.
Drilling is part of the fit, so the roof should be prepared with care. Mark each drill point with the frame held in place, check the clearance underneath the roof lining, and remove burrs before sealing. Once fitted, check that all bases sit flat and that fasteners are tight.
- Measure the bar length before ordering
- Check clearance inside the roof before drilling
- Seal drill holes to prevent water entry
- Re-tighten fasteners after the first trips
Specifications
| Brand | Rhino-Rack USA |
|---|---|
| Part number | RHORF2B2 |
| Product type | Backbone 5 base mounting system, roof rack accessory |
| Bases | Five per side of the roof |
| Material | Steel |
| Finish | Black powder coat |
| Cross bars included | No |
| Installation | Drilling is required |
Vehicle fitment
It is a direct fit for the 2018 to 2019 Ford F-250 Super Duty and the 2018 to 2019 Ford F-350 Super Duty. The bases are sized for the Super Cab roof, so the rack is not a universal part.
The F-450 and any Super Duty model year after 2019 are not covered. Crew Cab and regular cab trucks are not covered either. Confirm fit for your vehicle’s year, model and trim before ordering.
Installation notes
Drilling is required, so the bases must be fitted to the roof with the drill positions checked against the vehicle before any holes are made. Because cross bars are not included, a Pioneer System or other rack that uses cross bars needs its own bars.
What’s included
The base mounting frame for the Super Cab roof.
Not included: cross bars and the Pioneer System.









